|
BCM5461SA1KPF Datasheet, PDF (1/2 Pages) Broadcom Corporation. – 10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER | |||
|
BCM5461S
®
10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER
FEATURES
⢠Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit
Ethernet transceiver
⢠GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
⢠Line-side copper and fiber interfaces
⢠On-chip low-voltage regulators
⢠Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
⢠0.13µ CMOS â low power and cost
⢠Low power
- Less than 700 mW per port
- Wake on LAN support
- Advanced power management
⢠Trace matched output impedance
⢠Line-side loopback
⢠Low EMI emissions
⢠Cable plant diagnostic
- Cable plant analyzer function detects cable plant impairments
- Link quality indication LED
- Automatic detection and correction of wiring pair swaps, pair skew,
and pair polarity
- Automatic MDI/MDIX crossover at all speeds
⢠Robust CESD tolerance
⢠Support for jumbo packets up to 9 KB
⢠IEEE 1149.1 (JTAG) boundary scan
⢠128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages
10/100/100BASE-T SFP/GBIC Module
SUMMARY OF BENEFITS
⢠Simplifies system and board design.
- Reduced I/O pin requirements with RGMII (over 50%), SGMII
(over 75%), and SerDes (over 80%).
- Clock timing can be adjusted to eliminate board trace delays
required by the RGMII specification.
⢠Flexibility for copper or fiber applications.
⢠Lowers system BOM cost and simplifies system design.
⢠Provides interoperability with IEEE standard devices operating at 10
Mbps, 100 Mbps, and 1000 Mbps at half- and full-duplex.
⢠Requires no airflow or heatsink.
⢠Provides compliance with PCI 2.2 and PC99/PC2000.
⢠Eases system level debug.
⢠Reduces system design constraints to meet EMI emissions standards.
⢠Cable diagnostic function characterizes cable plant condition and
immediately indicates cabling issues.
- Prevents erroneous equipment return due to bad cable plants.
- Prevents manufacturing fall-out due to bad cable plants.
⢠High CESD tolerance prevents equipment damage and return.
⢠Operates with larger packets for wider range of packet protocol
support and improved efficiency.
⢠Ease of manufacturing with JTAG support, simplified power supply,
and multiple MAC interfaces.
100BASE-T Gigabit Uplink
SerDes
SFP Connector
BCM5646
x2
BCM5461S
BCM5461S
Optical Module
Switch/MAC
Transformer
RJ-45
10/100/1000BASE-T SFP/GBIC Module
BCM5248
Octal
10/100 Mbps PHY
BCM5248
Octal
10/100 Mbps PHY
BCM5248
Octal
10/100 Mbps PHY
100BASE-T Gigabit Uplink
|
▷ |