|
BCM5396 Datasheet, PDF (1/2 Pages) Broadcom Corporation. – 16-GE PORT SWITCH WITH INTEGRATED SerDes | |||
|
BCM5396
®
16-GE PORT SWITCH WITH INTEGRATED SerDes
FEATURES
SUMMARY OF BENEFITS
⢠Eighth-generation switch on a chip
⢠Integrates
⢠One GMII/RGMII/RvMII interface
⢠Seventeen MACs (802.x compliant) with support for 9-KB
jumbo frames
⢠Sixteen SGMII/SerDes interfaces and 256-KB packet buffer
memory
⢠Non-blocking 17-Gigabit Ethernet fully integrated switch fabric
⢠SPI Interface for easy setup and managed operation
⢠Classifies packets using four 802.1p QoS or DiffServ priority
queues
⢠VLAN 4k 802.1Q or port-based support
⢠Supports up to 4k unicast MAC addresses
⢠Supports MAC-based port aggregation (trunking)
⢠Flow control
⢠Full-duplex (802.3x) and half-duplex options support
⢠Supports automatic address learning and aging
⢠Support for Spanning Tree and Rapid Spanning Tree
⢠Low power 0.13 µm 1.2 V CMOS core: <2.5W Pd.
⢠Supports 802.1x MAC Security
⢠Port-based rate control feature with 64kbps granularity
⢠256-pin FBGA package (small form factor 17 mm x 17 mm)
⢠Enables a new generation of lower-cost switches with Gigabit
Ethernet connectivity and much smaller form factors.
⢠Uses field-proven industry-standard Gigabit Ethernet SerDes
which lowers overall system interoperability and reliability
risks.
⢠Provides the most cost-effective Gigabit Ethernet connectivity
to the desktop and control plane for all remote, branch, and
Enterprise needs.
⢠802.1Q tag VLAN, trunking, and 802.1p priority enables the
switch to be designed into a wide variety of applications from
unmanaged to websmart to managed switch.
⢠Jumbo frame support allows the device to be connected to
corporate server farms and networks while maintaining
maximum TCP/IP performance.
⢠CPUs are not required to initialize and run in cost-sensitive
unmanaged applications, providing true plug-and-play
connectivity.
⢠Suitable for fully managed applications due to support for
Spanning Tree and 802.1x MAC security
⢠SGMII interfaces ensure superior EMI performance and
lowest possible number of required board layers while
enabling connections to industry-standard physical layer
devices (e.g., BCM5464R)
⢠Lowest possible system cost through minimized number of
external components.
⢠Higher system reliability and noise reduction due to
elimination of component with lowest MTBF (the fan).
16-Gigabit Ethernet Ports for SOHO and Subnetwork Applications
IP Phones
Uplink Copper
or Fiber
Cable/DSL/Wireless
Router
Printer
Server
|
▷ |