|
BCM5226_04 Datasheet, PDF (1/2 Pages) Broadcom Corporation. – 10/100BASE-TX/FX HEX-Φ TRANSCEIVER | |||
|
BCM5226
®
10/100BASE-TX/FX HEX-Φ⢠TRANSCEIVER
FEATURES
SUMMARY OF BENEFITS
⢠Single-chip six-port Fast Ethernet transceiver
⢠HP Auto-MDIX
⢠Low-power 2.5V CMOS technology
⢠Compatible with 2.5V I/O and 3.3V I/O
⢠Reduced Media Independent Interface (RMII)
⢠Serial Media Independent Interface (SMII)
⢠Fully integrated digital adaptive equalization
⢠On-chip multimode transmit waveshaping
⢠Edge-rate control eliminates external filters
⢠Integrated baseline wander correction
⢠Full-duplex support
⢠Twisted-pair or fiber support on any or all ports
⢠Interrupt output capability
⢠Loopback mode for diagnostics
⢠160-pin PQFP (BCM5226R)
⢠128-pin PQFP (BCM5226S)
⢠Proven Broadcom proprietary DSP Digi-Φ⢠architecture
⢠Target usage: Fast Ethernet switches.
⢠Low power < 300 milliwatts per port.
⢠Auto-MDIX detects and corrects cabling errors.
⢠Provides robust performance over a broad range of operating
conditions.
⢠Single-chip device contains six independent Fast Ethernet
transceivers.
⢠Performs all physical layer interface functions for 100BASE-
TX full-duplex or half-duplex Ethernet on Category 5 twisted-
pair cable and 10BASE-T full- or half-duplex Ethernet on
Category 3, 4, or 5 cable.
⢠Permits transmission over fiber-optic cabling when paired
with an external fiber-optic transceiver.
⢠Compliant with IEEE 802.3 standard.
⢠IEEE 1149.1 (JTAG) scan chain support.
Quad BCM5208 Versus HEX BCM5226 Comparison
6 Active PHY components
+ 6 MACs including switch fabric
4 Active SMII PHY components
+ SMII MACs embedded in switch chip
Switch Fabric and System Logic
QUAD MAC
QUAD MAC
24x16=384 MII Pins
BCM5208
Port 1
BCM5208
Port 24
Switch Fabric with Embedded MACs
24x2=48 SMII Pins
BCM5226 BCM5226 BCM5226 BCM5226
Port 1
Port 24
|
▷ |