|
BCM5208 Datasheet, PDF (1/1 Pages) Broadcom Corporation. – 10/100 BASE-TX QUAD TRANSCEIVER | |||
|
BCM5208
PRODUBCrTief
BCM5208 10/100BASE-TX QUAD-Φ⢠TRANSCEIVER
BCM5208 FEATURES
⢠The Broadcom® BCM5208 is a Quad-Φ 10/100BASE-
T Transceiver that contains four 10BASE-T/100-
BASE-TX transceivers
⢠10BASE-T/100BASE-TX/FX IEEE 802.3u-compliant
⢠Full-duplex Support in All Modes
⢠IEEE 802.3u-compliant Auto-Negotiation
⢠Media Independent Interface (MII) for Each Port
⢠Shared MII Serial Management Interface
⢠Fully-integrated Digital Adaptive Equalizers
⢠125 MHz Clock Generator and Timing Recovery
⢠Integrated Multimode Transmit Wave Shaping
⢠Integrated Baseline Wander Correction
⢠Carrier Integrity Monitor on Each Port
⢠Port Switching for Multisegment Repeaters
⢠MII Repeater Mode Support in All Modes
⢠LED Status Pins
⢠Loop-back Mode for Diagnostics
⢠IEEE 1149.1 (JTAG) Support
⢠3.3V Power Supply
⢠208-Pin PQFP Package
SUMMARY OF BENEFITS
⢠Fully-integrated TX/FX Quad PHY Transceiver (MII
to TX Magnetics/FX Optics)
⢠Increases system port density
⢠Decreases system cost per port
⢠Simplifies system and board design
⢠Reduces power consumption
⢠On-chip Multimode Transmit Wave Shaping
⢠Eliminates need for external filters
⢠Minimizes EMI
⢠Flexible Ethernet PHY Solution:
⢠10BASE-T, 100BASE-TX or 100BASE-FX full-
duplex
⢠Suited for both Ethernet switch and repeater products
⢠Digital Adaptive Equalization and Clock Recovery
⢠Increases SNR by 3dB over ideal analog equalizers
⢠Robust performance in harsh noise environments and
over sub-standard cable
⢠Immune to on-chip noise and crosstalk
⢠Insensitive to variations in process, temperature
and voltage
24-Port 10/100BASE-T Ethernet Switch Example
BCM5208
10/100BASE-TX
QUAD-ΦTM
Transceiver
BCM5208
10/100BASE-TX
QUAD-ΦTM
Transceiver
MAC
MAC
MAC
MAC
MAC
MAC
MAC
MAC
Switching
Engine
Switch Module
MP Memory
Logic
|