|
BCM4328 Datasheet, PDF (1/2 Pages) Broadcom Corporation. – AirForce One SINGLE-CHIP IEEE 802.11a/b/g MAC/BASEBAND/RADIO WITH INTEGRATED CPU | |||
|
BCM4328
®
AirForce One⢠SINGLE-CHIP IEEE 802.11a/b/gâ¢
MAC/BASEBAND/RADIO WITH INTEGRATED CPU
FEATURES
POWER MANAGEMENT
⢠Highly integrated one-chip MAC, baseband, dual-band direct
conversion radio and ARM7⢠processor for low-power embedded
applications.
⢠Designed to meet exacting requirements of mobile devices,
including small form factor, ultra-low power consumption, and low
cost.
⢠Footprint-compatible with BCM4326 single-chip
IEEE 802.11b/g⢠2.4-GHz band MAC/baseband/radio with
integrated CPU.
⢠Support for multiple interface options popular in embedded
designs: SDIO (1- and 4-bit) and USB 2.0.
⢠Embedded ARM7 CPU that executes the full WLAN driver,
eliminating the need for complicated wireless LAN integration into
the host platform.
⢠Portable streamlined software interface for easy migration to
embedded operating systems.
⢠Support for advanced Bluetooth® coexistence algorithms with
hardware interface targeted at voice and multimedia applications.
⢠On-chip boot ROM and SRAM for a complete WLAN subsystem.
⢠Internal fractional nPLL allows support for a wide range of
reference clock frequencies.
⢠Requires only a single 3.3V external supply voltage.
⢠3.3V/1.8V-tolerant I/O.
⢠Support for 2.5Vâ5.5V VBAT supplies with a single external
switching regulator.
⢠On-chip UART and JTAG interfaces for ease of debugging.
⢠Available in FBGA (0.5-mm pitch) and WLCSP (0.25-mm pitch)
packages.
⢠Integrated power amplifier for medium-transmit power embedded
devices; interface to external power amplifier for high-power
applications.
⢠DSP architecture reduces the power required to transmit data by
30 percent.
⢠Low power consumption improves battery life of Wi-Fi® devices,
including handheld devices and consumer electronics.
⢠Integrated CPU; designed for low CPU usage to ensure that system
resources are available for handheld applications.
⢠Dynamic power management through on-board PMU.
⢠Only a single 3.3V external supply voltage is required.
AirForce⢠FEATURE SET
⢠SmartRadioâ¢: continuous calibration reduces test time and
improves manufacturability.
⢠Xpress⢠technology: standards-based frame bursting improves
overall network efficiency.
⢠125 High Speed Modeâ¢: standards-plus performance
enhancement delivers best real-world performance when both
client and AP support high-speed mode.
⢠Enhanced BroadRange⢠technology: standards-compliant
features increase receive sensitivity to improve range and distance
performance at higher data rates.
⢠Security:
⢠WPA⢠(personal) and WPA2⢠(personal) certified for powerful
encryption and authentication
⢠AES and TKIP in hardware for faster data encryption and IEEE
802.11i⢠compatibility
⢠Cisco® Compatible Extensions (CCX, CCX2.0, CCX3.0, CCX4.0)
certified
⢠SecureEasySetup⢠for simple Wi-Fi setup and WPA2/WPA
security configuration
⢠Worldwide support: global products supported with worldwide
homologated design.
⢠OneDriverâ¢: single driver across all platformsâIEEE 802.11a/b/
g/nâsimplifies driver update process and improves customer
satisfaction.
BCM94328 Sample Module
|
▷ |