ATF-501P8 Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – High Linearity Enhancement Mode

ATF-501P8
High Linearity Enhancement Mode^[1] ­Pseudomorphic HEMT
in 2x2 mm² LPCC^[3] ­Package
Data Sheet
Description
Avago Technologies’s ATF-501P8 is a single-voltage high
linearity, low noise E-pHEMT housed in an 8-lead JEDEC-
standard leadless plastic chip carrier (LPCC^[3]) package.
The device is ideal as a medium-power amplifier. Its
operating frequency range is from 400 MHz to 3.9 GHz.
The thermally efficient package measures only 2mm
x 2mm x 0.75mm. Its backside metalization provides
excellent thermal dissipation as well as visual ­evidence
of solder reflow. The device has a Point MTTF of over 300
years at a mounting temperature of +85ºC. All devices
are 100% RF & DC tested.
Notes:
1. Enhancement mode technology employs a single positive V_gs,
eliminating the need of negative gate voltage associated with
conventional depletion mode devices.
2. Refer to reliability datasheet for detailed MTTF data.
3. Conforms to JEDEC reference outline MO229 for DRP-N.
4. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias
power.
Pin Connections and Package Marking
Pin 8
Pin 7 (Drain)
Pin 6
Pin 5
Pin 1 (Source)
Pin 2 (Gate)
Pin 3
Pin 4 (Source)
Bottom View
Pin 1 (Source)
Pin 8
Pin 2 (Gate)
Pin 3
0Px
Pin 7 (Drain)
Pin 6
Pin 4 (Source)
Pin 5
Top View
Note:
Package marking provides orientation and identification:
“0P” = Device Code
“x” = Date code indicates the month of manufacture.
Features
• Single voltage operation
• High Linearity and P1dB
• Low Noise Figure
• Excellent uniformity in product specifications
• Small package size: 2.0 x 2.0 x 0.75 mm³
• Point MTTF > 300 years^[2]
• MSL-1 and lead-free
• Tape-and-Reel packaging option available
Specifications
• 2 GHz; 4.5V, 280 mA (Typ.)
• 45.5 dBm Output IP3
• 29 dBm Output Power at 1dB gain compression
• 1 dB Noise Figure
• 15 dB Gain
• 14.5 dB LFOM^[4]
• 65% PAE
• 23^oC/W thermal resistance
Applications
• Front-end LNA Q2 and Q3, Driver or Pre-driver
Amplifier for Cellular/PCS and WCDMA wireless
infrastructure
• Driver Amplifier for WLAN, WLL/RLL and MMDS
applications
• General purpose discrete E-pHEMT for other high
linearity applications
Attention: Observe precautions for
handling electrostatic ­sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1C)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.