English
Language : 

ALM-2203 Datasheet, PDF (1/2 Pages) AVAGO TECHNOLOGIES LIMITED – SDARS LNA Module
ALM-2203
SDARS LNA Module
Product Brief
Description
Avago Technologies’ ALM-2203 is an ultra low-noise front-
end module that combines three low-noise amplifiers
(LNA) with a Film Bulk Acoustic Resonator (FBAR) filter into
a 5mm x 5mm Molded Chip On Board (MCOB) package
for use in Satellite Digital Audio Radio Service (SDARS) ra-
dios. The LNAs use Avago Technologies’ proprietary GaAs
Enhancement-mode pHEMT process to achieve high gain
with very low noise figure and high linearity. Noise figure
distribution is very tightly controlled. The integrated filter
utilizes an Avago Technologies’ leading-edge FBAR filter
for exceptional rejection.
The low noise figure and high gain, coupled with low cur-
rent consumption make it suitable for use in critical low-
power SDARS applications.
Component Image
Surface Mount (5.0 x 5.0 x 0.95) mm3 MCOB
Top View
VAGO
ALM-2203
MIYYWW
XXXX
GND (pin 24)
RFout (pin 23)
GND (pin 22)
GND (pin 21)
RFin3 (pin 20)
GND (pin 19)
GND (pin 18)
RFout2 (pin 17)
GND (pin 1)
RFin (pin 2)
GND (pin 3)
GND (pin 4)
RFout LNA1 (pin 5)
GND (pin 6)
GND (pin 7)
GND (pin 8)
Features
• Very Low Noise Figure: 0.83 dB typ.
• Exceptional Cell/DCS/PCS/WLAN-Band rejection
• Advanced GaAs E-pHEMT & FBAR Technology
• 0.95mm typical thickness
• Small package dimension: ( 5.0 x 5.0 x 0.95 ) mm3
• Meets MSL3, Lead-free and halogen free
• Simultaneous SDARS/GPS operation
Target Specifications (Typical performance @ 25°C)
At 2.3325 GHz (unless specified), Vdd = 5V, Idd = 110mA
• Gain = 38.3 dB
• NF = 0.83 dB
• IIP3 = -9.0 dBm, IP1dB = -18.3 dBm
• S11 = -13.4 dB, S22 =-9.5 dB
• OOB IP1dB @ 824 – 894MHz: >13dBm
• OOB IP1dB @ 1710 – 1755MHz: 9.5dBm
• OOB IP1dB @ 1850 – 1990MHz: 8.5dBm
• OOB IP1dB @ 2400 – 2600MHz: 10.8dBm
Application
• Digital satellite radio
Block Diagram
RBias1 Vdd1 RBias2 Vdd2 RBias3 Vdd3
32 31
29 28
26 25
2
RFin
Bias
23
RFout
Bottom View
Note:
Package marking provides orientation and identification
MI = Manufacturer Code
YY = Manufacture year
WW = Manufacture work week
XXXX = Assembly lot number
5
RFoutLNA1
9
RFIn filter
20
RFin3
17
ALM-2203 RFout2