ACPL-M60L Datasheet, PDF (1/14 Pages) Broadcom Corporation. – Small Outline, 5 Leads, High CMR, High-Speed, Logic Gate Optocouplers

ACPL-M60L
Small Outline, 5 Leads, High CMR, High-Speed,
Logic Gate Optocouplers
Data Sheet
Description
The ACPL-M60L is an optically coupled gate that combines a
GaAsP light emitting diode and an integrated high gain photo
detector. The output of the detector IC is an open collector
Schottky-clamped transistor. The internal shield provides a
guaranteed common mode transient immunity specification of
15 kV/μs at 3.3V operation.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compatibility. The
optocoupler AC and DC operational parameters are
guaranteed from –40°C to +100°C, allowing trouble-free
system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot tolerate
and are recommended for use in extremely high ground or
induced noise environments.
Figure 1 Functional Diagram
ANODE 1
CATHODE 3
6 VCC
5 VO
4 GND
Features
 Dual voltage operation (3.3V/5V)
 15 kV/μs minimum Common Mode Rejection (CMR) at
V_CM = 1000V (3.3V operating voltage)
 High speed: 15 MBd typical
 LVTTL/LVCMOS compatible
 Low input current capability: 5 mA
 Guaranteed AC and DC performance over temperature:
–40°C to +100°C
 Safety approvals; UL, CSA, IEC/EN/DIN EN 60747-5-5
(Pending)
 Surface mountable
 Very small, low profile JEDEC Registered package outline
Applications
 Isolated line receiver
 Computer-peripheral interfaces
 Microprocessor system interfaces
 Digital isolation for A/D, D/A conversion
 Switching power supply
 Instrument input/output isolation
 Ground loop elimination
 Pulse transformer replacement
 Field buses
CAUTION
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation that may be induced by ESD. The
components featured in this data sheet are not
to be used in military or aerospace applications
or environments.
Broadcom
-1-