ACNT-H313 Datasheet, PDF (1/16 Pages) Broadcom Corporation. – 2.5 A Output Current IGBT Gate Drive Optocoupler in 15 mm Stretched SO8 Package

ACNT-H313
2.5 A Output Current IGBT Gate Drive Optocoupler in
15 mm Stretched SO8 Package
Data Sheet
Description
The Avago Technologies ACNT-H313 contains an LED, which is
optically coupled to an integrated circuit with a power output
stage. This optocoupler is ideally suited for driving power IGBTs
and MOSFETs used in motor control inverter applications. The
high operating voltage range of the output stage provides the
drive voltages required by gate-controlled devices. The voltage
and high peak output current supplied by this optocoupler can
be used to IGBT directly. For IGBTs with higher ratings, this
optocoupler can be used to drive a discrete power stage, which
drives the IGBT gate. The ACNT-H313 has the highest insulation
voltage of V_IORM = 2262 V_PEAK in the IEC/EN/DIN EN 60747-5-5.
Functional Diagram
NC 1
ANODE ²
CATHODE 3
NC 4
8 VCC
7 VOUT
6 ^NC
5 ^VEE
NOTE NC denotes Not Connected, and a 0.1 μF bypass capacity must
be connected between pins V_CC and V_EE.
Truth Table
V_CC – V_EE
V_CC – V_EE
LED “POSITIVE GOING” “NEGATIVE GOING”
V_O
(i.e., TURN-ON) (i.e., TURN-OFF)
OFF
0 - 30 V
ON
0 – 11 V
ON
11 - 13.5 V
ON
13.5 – 30 V
0 – 30 V
0 – 9.5 V
9.5 – 12 V
12 – 30 V
LOW
LOW
TRANSITION
HIGH
Features
 2.5 A maximum peak output current
 2.0 A minimum peak output current
 500 ns maximum propagation delay
 350 ns maximum propagation delay difference
 40 kV/μms minimum Common Mode Rejection (CMR) at
V_CM = 2000 V
 I_CC = 5.0 mA maximum supply current
 Under Voltage Lock-Out protection (UVLO) with hysteresis
 Wide operating V_CC Range: 15 V to 30 V
 Industrial temperature range: -40°C to 105°C
 Safety Approval
— UL Recognized 7500 V_RMS for 1 min
— CSA
— IEC/EN/DIN EN 60747-5-5 VIORM = 2262 VPEAK
Applications
 High Power System – 690V_AC Drives
 IGBT/MOSFET gate drive
 AC and Brushless DC motor drives
 Renewable energy inverters
 Industrial inverters
 Switching power supplies
CAUTION
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation that may be induced by ESD. The
components featured in this data sheet are not
to be used in military or aerospace applications
or environments.
Broadcom
-1-