|
ACMD-6013 Datasheet, PDF (1/2 Pages) AVAGO TECHNOLOGIES LIMITED – LTE Band 13 Duplexer with Public Safety Band Rejection | |||
|
ACMD-6013
LTE Band 13 Duplexer with Public Safety Band Rejection
Product Brief
Description
The Avago ACMD-6013 is a highly miniaturized duplexer
designed for use in LTE Band 13 (746 â 756 MHz DL, 777 â 787
MHz UL) handset applications. It is specially designed to reduce
or eliminate the A-MPR power backoff normally required to
meet NS-07 Public Safety Band (768-775 MHz) radiated
emission limits.
Low Insertion Loss in the Tx channel minimizes current drain
from the power amplifier, while low Rx channel Insertion Loss
improves receiver sensitivity.
The ACMD-6013 enhances the sensitivity and dynamic range of
handset receivers by providing high isolation of the
transmitted signal from the receiver input and high rejection of
transmit-generated noise in the receive band.
The Tx-Ant path of the ACMD-6013 provides at least 20 dB (24
dB Typ) rejection in the Public Safety Band. The duplexer
utilizes Avago Technologies innovative temperature-
compensated FBAR technology, dramatically reducing the
guard frequency required to transition from pass-band to
stop-band.
The ACMD-6013 is designed with Avago Technologiesâ
innovative Film Bulk Acoustic Resonator (FBAR) technology,
which makes possible ultra-small, high-Q filters at a fraction of
their usual size. The excellent power handling capability of
FBAR bulk-mode resonators supports the high output power
levels used in mobile communications applications, while
adding virtually no distortion.
The ACMD-6013 also utilizes Avago Technologiesâ advanced
Microcap bonded-wafer, chip scale packaging technology. This
process allows the filters to be assembled into a molded
chip-on-board module with an overall size of only 2.0 x 2.5 mm
and maximum height of 0.95 mm. The ACMD-6013 is
compatible with standard 2.0 x 2.5 mm duplexer PCB
footprints.
Applications
LTE Handsets or data terminals operating in the Band 13
frequency range.
Features
ï® Miniature Size
â 2.0 x 2.5 mm size
â 0.95 mm Max Height
â Standard 2 x 2.5 mm PCB footprint
ï® Temperature Compensated
ï® High Isolation
ï® High Power Rating
â 33 dBm Abs Max Tx Power
ï® Environmental
â RoHS Compliant
â Halogen free
â TBBPA Free
Specifications
ï® Rx Band Performance, 746 â 756 MHz, â 20 to +85°C
â Insertion Loss: 2.7 dB Max
â Rx Noise Blocking: 50 dB Min
ï® Tx Band Performance, 777.5 â 787 MHz, â 20 to +85°C
â Insertion Loss: 3.5 dB Max
â Tx Interferer Blocking: 53 dB Min
ï® Tx-Ant Path
â Public Safety Band Rejection: 20 dB Min, 24 dB Typ.
Functional Block Diagram
Ant
Port 3
(Pin 6)
Rx
Port 2
(Pin 1)
Tx
Port 1
(Pin 3)
Avago Technologies
-1-
|
▷ |