400 Datasheet, PDF (3/3 Pages) E-SWITCH – ROCKER SWITCHES - SUB-MINIATURE

Model 400
OUTLINE DRAWINGS
Model 423
Wire Lead Model
Wire Leads
Dual*
Section
Single
Section
Model 432
Wire Lead Model
Wire Leads
Lead Wires for Dual*
Section (if required)
Model 472
Wire Lead Model
Wire Leads
Dual*
Section
Single
Section
Model 482
Wire Lead Model
Wire Leads
Dual*
Section
Single
Section
Model 424
Terminal Model
"L" ±.030
.200 Max.
Dual*
Section
Single
Section
Solderable
Terminals
1.000±.030
(Fully
Retracted)
+.002
.750 _-.006 Dia.
.1248 Dia.**
Model 434
Terminal Model
Terminals for Dual*
Section (if required)
"L" ± .030
Solderable
Terminals
.745 Dia.
1.000±.030
(Fully
Retracted)
1.150Max.
.885
Max.
Mounting Hole
.188 Dia. (Typ. 4 Plcs.)
Model 474
Terminal Model
1.030
Max.
Dual*
Section
.625
.500
Single
Section
"M43" ± .020
.1248
Dia.**
.188 Typ.
1.500
"L" ± .030
Solderable
Terminals
1.000±.030
(Fully
Retracted)
.1248 Dia.**
.890
Max.
.437
Model 484
Terminal Model
1.030
.625
Max.
Dual*
Section
.281
Single
Section
"L" ± .030
Solderable
.250 Typ. Terminals
.500
Mounting Hole .136 Dia.(Typ. 4 Plcs.)
"M48" ± .020
1.000±.030
(Fully
Retracted)
.531
.1248
Dia.
.375±.010
Model Elect. Travel Mech. Travel Dim “L”
Number Inch±0.015 Inch±0.030 Inch±0.030
4XX-050
0.500
0.560
1.500
4XX-100
1.000
1.060
2.000
4XX-200
2.000
2.060
3.000
4XX-300
3.000
3.060
4.000
4XX-400
4.000
4.100
5.000
4XX-500
5.000
5.100
6.000
4XX-600
6.000
6.100
7.000
Notes:
* _{Dual sections and Center Tap are available on special order only}
** _{Diameter is 0.1248” +0.0000” / -0.0003”}
Dim “M43”
Inch±0.020
1.188
1.688
2.688
3.688
4.688
5.688
6.688
Dim “M48”
Inch±0.020
1.750
2.250
3.250
4.250
5.250
6.250
7.250
Unspecified tolerances are ±0.005”
Dimensions for “Wire Lead” models are the same as “Terminal” models except as indicated.
Housings, brackets, and caps are anodized aluminum.
Wire leads are #26 wire, 12 inch minimum length, meets MIL-C-16878C.
Shafts are stainless steel, chamfer is 0.015” x 45°.
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
April 20, 2012
Model 400 page 3 of 3