8141 Datasheet, PDF (2/4 Pages) Sonardyne sound in depth – Tsunami Detection System

Model 8140 series
ENVIRONMENTAL (MIL-PRF-39023)
Operating Temperature Range
-40°C to +125°C dynamic, -55°C to +125°C static
Temperature Cycling
5 cycles, -40°C to +125°C, maximum 5% ΔR
Shock
6 ms Saw-tooth, 100 G’s, 0.1 ms maximum discontinuity
Vibration
15 G’s, 10 to 2,000 Hz, maximum 5% ΔR, 0.1 ms maximum discontinuity
Moisture Resistance
Five 24 hour cycles, maximum 5% ΔR
High Temperature Exposure
1,000 hours at 125°C, maximum 5% ΔR
Rotational Load Life (1 lb side load for 8148) 5 million shaft revolutions + 900 hours at 2.0 Watts & 70°C, maximum 5% ΔR
Ingress Protection Rating (IP Code)
IP50, IP66 available as option (feature code ES)
ORDERING INFORMATION
Model Series
Resistance Prefix
Resistance Value
8146 R 10K T5 L.25 xx
Optional Feature Code
(see table)
Linearity
Optional Non-standard Tolerance
FEATURE CODES
Center Tap
Linearity Tape
Flatted Shaft
Slotted Shaft (standard on single gang 8146 without RS feature)
Rear Shaft Extension (8143, 8146 single cup only)
Shaft Lock (8146 only)
High Torque 2-6 oz.-in. (8146 only)
Additional Gang
Gold Plated Solder Lug Terminals (see optional terminal configuration)
Seal (IP66) 8144, 8146, or 8148 only
CT
When multiple Feature codes
are used the P/N shall be in
LT
the same sequence as listed in
this table (top to bottom).
FS
SS
RS
SL
HT
2G
FT
ES
CIRCUIT DIAGRAM
(S)
(CCW)
(CW)
STANDARD RESISTANCE VALUES
1K
2K
5K
10K 20K 50K 100K
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
November 13 2015
Model 8140 page 2 of 4