SMP100J Datasheet, PDF (1/2 Pages) Bi technologies – SURFACE MOUNT MOULDED POWER RESISTOR

SURFACE MOUNT MOULDED POWER RESISTOR
Features…………………………………………………………
ƒ Non-Inductive, Moulded Small, in circuit 10W.
ƒ Very low thermal resistance in multiple planes
ƒ SOIC type Package.
ƒ RoHS compliant.
Applications………………………………………………
ƒ High frequency emitter resistors in switching power supplies.
ƒ High precision CRT color video amplifiers.
ƒ High frequency snubber and pulse handling circuits.
ƒ Pulse generator load resistors.
ƒ In-rush current protection
ƒ Bleeder Resistors
.
………
Specification
Outline Dimensions
0.20 Typ
11.3 max
.008
9.00
.445
.354
9.30+/-0.1
.366+/-.005
0.96 Typ
.038
8.4 max
5.59+/-0.13
3.50
.330
.220+/-.005
.138
Specifications subject to change without notice.
Items
Power Rating
Short time overload
Resistance Range (Ω)
Nominal Resistance Series
TCR(ppm/°C), see note 2.
Tolerance
Operating Temp. Range
Max. Operating Voltage
Dielectric Withstanding Voltage.
Load Life
Humidity
Temp. Cycle
Soldering Heat (Max)
Solderability
Insulation Resistance
Vibration
Rear view
Dimensions: mm
inches
Solderable
area
Specification
10 Watts
50W for 5s
10 to 10K
E12
100ppm/°C 10Ω and above
+/-1% & +/-5%
-55°C to+155°C
500VDC or √(P.R)
4000 V DC
∆R +/- (1 % + 0.05 Ω)
∆R +/- (1 % + 0.05 Ω)
∆R +/- (0.25% + 0.05 Ω)
∆R +/- (0.25 %+0.05 Ω)
Min. 95% coverage
Over 1,000 Meg Ω
∆R +/- (0.25% + 0.05 Ω)
Test Conditions
25°C ambient. Note 1
25°C ambient. Note 1
-55°C to +155 °C
60 seconds.
25 °C, 90 min .ON, 30 min. OFF, 1000 hours.
40°C, 90-95%RH, DC 0.1W, 1000 hours.
-55°C,30 min.,+155°C,30 min., 5cycles
250+/-5°C, 3seconds,
230+/-5°C, 3seconds.
Between terminals and tab.
Notes:
1. Tested in accordance with JD51 mounting instructions, in 5W application 10W available.
2. Contact factory for values below 10Ω..
3. Contact factory for custom products, non-standard values and tolerances
1