PS30M Datasheet, PDF (1/6 Pages) Bi technologies – Slide Potentiometer

Model PSxxM / PSxxL
Slide Potentiometer
Molded Element
100,000 Cycle Life
Metal or Plastic Shaft Options
With/Without LED Illumination
With/Without Dust Cover
RoHS Compliant
MODEL STYLE
Dual Gang Without LED
Single Gang With LED
ELECTRICAL¹
Resistance Range, Ohms
Standard Resistance Tolerance
Resistance Tapers
Residual Resistance
Input Voltage, Maximum
Power rating, Watts (Single Unit / Dual Unit)
Dielectric Strength
Insulation Resistance, Minimum
Sliding Noise
Gang Error
MECHANICAL
Static Stop Strength, Minimum
Operating Force
Detent Slip-out force
DURABILITY
Sliding Life
PSxxM
PSxxL
500 -1M
 20%
A,B,C
Terminals 1 to 2:Less than 10 ohms
Terminals 2 to 3:Less than 30 ohms
Linear B taper: 200 Vac Other tapers: 150 Vac
Linear B taper: 20mm: 0.1W / 0.05W, 30mm: 0.2W / 0.1W
45mm: 0.25W / 0.125W, 60mm:0.2W / 0.2W
Other tapers: 20mm: 0.05W / 0.025W, 30mm: 0.1W / 0.05W
45mm: 0.125W / 0.06W, 60mm:0.1W / 0.1W
300Vac, 1 minute
10M ohms at 250Vdc/ 1 minute
Less than 100mV
±3dB (-40dB to 0dB)
5.0 Kgf/cm
10gf to 100gf
30gf to 200gf
100,000 cycles
1 _{Specifications subject to change without notice.}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
March 19, 2012
page 1 of 6
BI technologies