6370 Datasheet, PDF (1/4 Pages) Bi technologies – 1-5/16 Diameter Single Turn Conductive Plastic Precision Potentiometer / Position Sensor

MODEL 6370 SERIES
1-5/16” Diameter
Single Turn
Conductive Plastic
Precision Potentiometer /
Position Sensor
FEATURES
• Anodized Aluminum Housing
• Front and Rear Ball Bearings
MODEL STYLES
6371
6373
ELECTRICAL
Resistance Range, Ohms
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity*
Minimum Practical Independent Linearity
Input Voltage, Maximum
Power Rating, Watts
Dielectric Strength
Insulation Resistance, Minimum
Output Smoothness, Maximum
Actual Electrical Travel, Nominal
Electrical Continuity Travel, Minimum
End Voltage, Maximum
Tap Tolerance
Resolution
Temperature Coefficient**
Specifications subject to change without notice.
* Linearity is measured between 1% and 99% of input voltage.
** Special tempco available to ±100ppm/°C.
2-75
2
1/4” Shaft, 3/8” Bushing
1/4” Shaft, Servo
1K to 300K
±10%
±5%
±0.5%
±0.1%
400Vdc not to exceed power rating
2.0 at 70°C derating to 0 at 125°C
1,000V rms
1,000 Megohms
0.1%
348°
350°
0.35% of Input Voltage
0.5% of Input Voltage
Essentially infinite
–800 ppm/°C
Model 6370 Series