627V100_12 Datasheet, PDF (1/4 Pages) Bi technologies – Designed For Pentium® Power Supply

MODEL 627 V100
Model 627 V100 Series
Designed For Pentium® Power Supply
Surface Mount Resistor Networks
Applications
· Designed for P54C, P54C-VR and P54C-VRE
Pentium® Processors when used in conjunction with
Linear Technology Models LT 1266/1267 or LT 1584/1585
voltage regulator IC’s.
Electrical
Standard Resistance Tolerance, at 25°C
Operating Temperature Range
Temperature Coefficient of Resistance
Temperature Coefficient of Resistance Tracking
Voltage Coefficient of Resistance
Maximum Operating Voltage
Insulation Resistance, Minimum
Environmental
Thermal Shock plus Power Conditioning
Short Time Overload
Moisture Resistance
Mechanical Shock
Vibration Shock
Low Temperature Operation
High Temperature Exposure
Load Life, 2,000 Hours (≤33 Ohms = ±0.5 Ohm)
Resistance to Solder Heat
Dielectric Withstanding Voltage
Temperature Exposure, Maximum
Marking Permanency
Lead Solderability
Flammability
Storage Temperature Range
Specifications subject to change without notice.
Pentium® is a registered trademark of Intel Corporation.
±2%
-55°C to +125°C
±100ppm/°C
50ppm/°C
±100ppm/V
25Vdc
10,000 Megohms
ΔR 0.70%
ΔR 0.25%
ΔR 0.50%
ΔR 0.25%
ΔR 0.25%
ΔR 0.25%
ΔR 0.50%
ΔR 0.50%
ΔR 0.25%
200V for 1 minute
215°C for 3 minutes
MIL-STD-202, Method 215
MIL-STD-202, Method 208
UL-94V-0 Rated
-55°C to +150°C
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
© TT electronics plc
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
06.12