6187R10KT5L1.0 Datasheet, PDF (1/3 Pages) Bi technologies – 7/8” Diameter Single Turn Conductive Plastic Precision Potentiometer Position Sensor

Model 6180 series
7/8” Diameter
Single Turn
Conductive Plastic
Precision Potentiometer /
Position Sensor
MODEL STYLES AVAILABLE
6181
6184
6186
6187
6188 for side load applications
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Strength
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Resolution
Temperature Coefficient of Resistance³
Temperature Coefficient of Output Voltage⁴
1/8” Shaft, 1/4” Bushing
6 mm Shaft, 3/8” Bushing
1/8” Shaft, 3/8” Bushing
1/4” Shaft, 3/8” Bushing
1/4” Shaft, 3/8” Bushing
1K to 100K Ohms
±10%
±5%
±1%
±0.5%
400 VDC maximum, not to exceed power rating
1.0 Watt at 70°C, derating to 0 at 125°C
750 V rms
1,000 Megohms minimum
0.1% maximum
340° nominal (300° with stop feature)
350° nominal (320° with stop feature)
maximum 0.5% of input voltage
essentially infinite
-400 ppm/°C typical
±10 ppm/°C typical
MECHANICAL
Total Mechanical Travel
Number of Gangs
Weight
Backlash
Static Stop Strength
Panel Nut Tightening Torque
Start/Run Torque
360° Continuous (320° ±3° with stop feature)
1 maximum
0.53 oz. nominal (single gang)
1° maximum
40 oz.-in.
25 lb.-in. maximum
1.0 oz.-in.
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Special TCR available to ±100 ppm/°C.}
4 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel}
Pb RoHS 2
compliant
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
December 20, 2013
Model 6180 page 1 of 3