6143_13 Datasheet, PDF (1/3 Pages) Bi technologies – Potentiometer / Position Sensor

Model 6143, 6163
7/8” Diameter
Single Turn
Conductive Plastic
Precision Potentiometer /
Position Sensor
MODEL STYLES AVAILABLE
6143
6163
1/8” Shaft, Bronze Sleeve Bearing
1/8” Shaft, Ball Bearing
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Strength
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Resolution
Temperature Coefficient of Resistance³
Temperature Coefficient of Output Voltage⁴
1K to 100K Ohms
±10%
±5%
±1%
±0.5%
400 VDC maximum, not to exceed power rating
1.0 Watt at 70°C, derating to 0 at 125°C
750 V rms
1,000 Megohms minimum
0.1% maximum
340° nominal
350° nominal
maximum 0.5% of input voltage
essentially infinite
-400 ppm/°C typical
±10 ppm/°C typical
MECHANICAL
Total Mechanical Travel
Number of Gangs
Weight
Shaft Runout
Pilot Diameter Runout
Lateral Runout
Shaft Radial Play
Start/Run Torque
Bearing type
360° continuous
1 maximum
0.46 oz. nominal
maximum T.I.R. 0.003”
maximum T.I.R. for 6143: 0.005”, for 6163: 0.003”
maximum T.I.R. for 6143: 0.005”, for 6163: 0.003”
maximum 0.005”
maximum 0.6 oz.in. for 6143, 0.5 oz.-in. for 6163
6143: bronze sleeve bearing, 6163: ball bearing
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Special TCR available to ±100 ppm/°C.}
4 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
October 1, 2013
Model 6143, 6163 page 1 of 3
Pb RoHS 2
compliant