6134 Datasheet, PDF (1/3 Pages) Bi technologies – Precision Potentiometer Position Sensor

Model 6130 series
Low Profile 7/8” Diameter
Single Turn Conductive Plastic
Bronze Bearing
Position Sensor
Precision Potentiometer
MODEL STYLES AVAILABLE
6134
6 mm Shaft, 3/8” Bushing
6137
1/4” Shaft, 3/8” Bushing
6138 for heavy side load applications
1/4” Shaft, 3/8” Bushing
6130-XXX
Custom models are available; Contact Customer Service for special features or tolerances
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Strength
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Resolution
Temperature Coefficient of Resistance
Temperature Coefficient of Output Voltage³
1K to 100K Ohms
±20%
±1% (±2% for values greater than 20K Ohms)
±0.5%
400 VDC maximum, not to exceed power rating
1.0 Watt at 70°C, derating to 0 at 125°C
750 V rms
1,000 Megohms minimum
0.1% maximum
340° ±3° (300° ±3° with stop feature)
350° ±3° (343° ±3° with stop feature)
maximum 0.5% of input voltage
essentially infinite
-400 ppm/°C typical
±10 ppm/°C typical
MECHANICAL
Total Mechanical Travel
Weight
Backlash
Static Stop Strength
Start/Run Torque
Panel Nut Tightening Torque
Construction
Hazardous Materials
360° continuous (343° with stop feature)
0.6 oz. typical
1° maximum
40 in.-oz. maximum
0.5 in.-oz. maximum
25 in. lb. Max.
zinc die cast housing, stainless steel shaft, bronze bearing
Pb free, E.U. RoHS compliant, no REACH SVHC’s
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
May 21, 2014
Model 6130 page 1 of 3
Pb RoHS 2
compliant