405 Datasheet, PDF (1/3 Pages) CTS Corporation – Surface Mount Quartz Crystal

Model 405 Series
Linear Actuation, Low Cost
Conductive Plastic
Precision Potentiometer /
Position Sensor
MODEL STYLES AVAILABLE
Model #
405
Shaft
1/8” plain
Termination Style
Wire Leads
Weight (grams)
28 + (16 x mechanical travel)
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Withstanding Voltage
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Resolution
Temperature Coefficient of Resistance³
Temperature Coefficient of Output Voltage⁴
see Table 1
±20%
±10%
see Table 1
see Table 1
400 VDC maximum, not to exceed power rating
see Table 1 for Watts at 85°C, derating to 0 at 125°C
1,000 V rms
1,000 Megohms minimum at 500 VDC
0.1% maximum at 10” to 18” per minute
see Table 1
within mechanical travel
maximum 0.5% of input voltage
essentially infinite
-400 +/-400 ppm/°C typical
±10 ppm/°C typical
MECHANICAL
Total Mechanical Travel
Actuating Force
Shaft Rotation
Backlash
Static Stop Strength
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Special hybrid TCR available to ±100 ppm/°C for narrower range of resistance.}
4 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel.}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
July 29, 2014
Model 405 page 1 of 3
see Table 1
10 oz. maximum
continuous
0.003” maximum
10 lb. minimum
Pb RoHS 2
compliant