404 Datasheet, PDF (1/3 Pages) Bi technologies – Position Sensor

Model 404 Series
Spring Return
Linear Actuation
Conductive Plastic
Position Sensor
Applications in Robotics, Automotive,
Heavy Equipment, and Industrial
Automation
FEATURES & BENEFITS
Short travel (0.5 inches), linear motion with spring return
Accurate position feedback
Low cost
Compact design for small spaces
Conductive plastic technology
Long life - 5 million actuations
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Strength
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Resolution
Temperature Coefficient of Resistance³
Temperature Coefficient of Output Voltage⁴
1K to 150K Ohms
±10%
±5%
±1%
±0.5%
400 VDC maximum, not to exceed power rating
0.25 Watts at 70°C, derating to 0 at 125°C
1,000 V rms
1,000 Megohms minimum
0.1% maximum at 10” to 18” per minute
0.50” ±0.015” (12.7 mm ±0.38 mm)
within mechanical travel
maximum 0.5% of input voltage
essentially infinite
-400 ppm/°C typical
±10 ppm/°C typical
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Special TCR available to ±100 ppm/°C.}
4 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel.}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
February 10, 2014
Model 404 page 1 of 3
Pb RoHS 2
compliant