3381 Datasheet, PDF (1/3 Pages) Bi technologies – Precision Potentiometer / Position Sensor

Model 3381
1 - 5/16” Diameter
Single Turn
Conductive Plastic
Precision Potentiometer / Position Sensor
ELECTRICAL¹
Resistance Range
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity²
Minimum Practical Independent Linearity
Input Voltage
Power Rating
Dielectric Strength
Insulation Resistance
Output smoothness
Actual Electrical Travel
Electrical Continuity Travel
End Voltage
Tap Tolerance
Resolution
Temperature Coefficient of Resistance³
Temperature Coefficient of Output Voltage⁴
MECHANICAL
Total Mechanical Travel
Number of Gangs
Weight
Shaft Runout
Pilot Diameter Runout
Lateral Runout
Shaft Radial Play
Start/Run Torque
1K to 300K Ohms
±10%
±5%
±0.5%
±0.25%
400 VDC maximum, not to exceed power rating
2.0 Watts at 70°C, derating to 0 at 105°C
1,000 V rms
1,000 Megohms minimum
0.1% maximum
348° nominal
350° minimum
maximum 0.5% of input voltage
maximum 0.5% of input voltage
essentially infinite
-400 ppm/°C typical
±10 ppm/°C typical
360° Continuous (350° ±2° with stop feature)
1 maximum
1.5 oz. nominal
0.0025” maximum T.I.R.
0.0025” maximum T.I.R.
0.003”maximum T.I.R.
0.004” maximum
1.0 oz.-in. maximum, ES option adds 0.5 oz.-in.
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Special TCR available to ±100 ppm/°C.}
4 _{Measured with 10 VDC CW to CCW and slider at 50% of electrical travel}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
October 31 2014
Model 3381 page 1 of 3
Pb RoHS 2
compliant