23AR10KLFTR Datasheet, PDF (1/4 Pages) Bi technologies – 4mm Square Sealed Single Turn Surface Mount Cermet Trimming Potentiometer

MODEL 23A, B, S
4mm Square
Sealed Single Turn
Surface Mount
Cermet Trimming
Potentiometer
ELECTRICAL
Standard Resistance Range, Ohms
Standard Resistance Tolerance
Input Voltage, Maximum
Power Rating, Watts
End Resistance, Maximum
Actual Electrical Travel, Nominal
Dielectric Strength
Insulation Resistance, Minimum
Resolution
Contact Resistance Variation, Maximum
ENVIRONMENTAL
Seal
Temperature Coefficient, Maximum
Operating Temperature Range
Thermal Shock
Moisture Resistance
Shock, 6ms Sawtooth
Vibration
High Temperature Exposure
Rotational Life
Load Life at 0.25 Watts
Resistance to Solder Heat
MECHANICAL
Mechanical Stops
Stop Strength, Minimum
Torque, Maximum
Weight, Nominal
Fluorinert® is a registered trademark of 3M Company.
Specifications subject to change without notice.
1
10 to 2Meg
±20%
200 Vdc or rms not to exceed power rating
0.25 at 70°C derating to 0 at 125°C
1% or 3 Ohms, whichever is greater
210°
500 Vrms
100 Megohms
Essentially infinite
1% or 3 Ohms, whichever is greater
85°C Fluorinert® (No Leaks)
±100ppm/°C (<200 Ohms, >1Meg = ±250ppm/°C)
–55°C to +125°C
5 cycles, –55°C to +125°C (2% ∆RT, 2% ∆VR)
Ten 24 hour cycles (3% ∆RT)
100G’s (1% ∆RT, 1% ∆VR)
20G’s, 10 to 2,000 Hz (1% ∆RT, 1% ∆VR)
250 hours at 125°C (2% ∆RT, 2% ∆VR)
100 cycles (5% ∆RT)
1,000 hours at 70°C (3% ∆RT, 1% ∆VR)
260°C for 10 sec. (1% ∆RT)
Solid
4 oz.-in. (300 gr-cm)
2 oz.-in. (150 gr-cm)
.005 oz. (0.14 grams)
1-9
Model 23A, B, S