22AR10KLFTR_10 Datasheet, PDF (1/3 Pages) Bi technologies – Cermet Trimming Potentiometer

Model 22
3 mm Square
Sealed Single Turn
Surface Mount
Cermet Trimming Potentiometer
MODELS AVAILABLE
J Hook
Side Mount
22A
22S
ELECTRICAL
Standard Resistance Range
Standard Resistance Tolerance
Input Voltage
Power Rating
End Resistance
Actual Electrical Travel
Dielectric Strength
Insulation Resistance
Resolution
Contact Resistance Variation
ENVIRONMENTAL
Seal
Temperature Coefficient
Operating Temperature Range
Thermal Shock
Moisture Resistance
Shock
Vibration
High Temperature Exposure
Rotational Life
Load Life
Resistance to Solder Heat
10 Ohms to 2 Megohms
±20%
200 Vdc Max. or rms not to exceed power rating
0.125 Watts at 70°C derating to 0 at 125°C
1% or 3 Ohms Max., whichever is greater
220° nominal
500 Vrms
100 Megohms Min.
Essentially infinite
3% or 3 Ohms Max., whichever is greater
85°C Fluorinert® (No Leaks)
±100 ppm/°C (<100 Ohms = ±150 ppm/°C)
–55°C to +125°C
Five cycles –55°C to +125°C (2% ∆RT, 1% ∆VR)
Ten 24 hour cycles (3% ∆RT)
6 ms sawtooth, 100 G’s (1% ∆RT, 1% ∆VR)
20 G’s, 10 to 2,000 Hz (1% ∆RT, 1% ∆VR)
250 hours at 125°C (2% ∆RT, 2% ∆VR)
100 cycles (3% ∆RT)
1,000 hours at 70°C & 0.125 Watts (3% ∆RT, 1% ∆VR)
260°C for 5 seconds
MECHANICAL
Mechanical Stops
Stop Strength
Torque
Weight
Wiper Position
Specifications subject to change without notice.
Fluorinert® is a registered trademark of 3M Company.
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
August 12, 2010
Model 22 page 1 of 3
Solid
1.3 oz.-in. Min. (300 g-cm)
0.65 oz.-in. Max. (150 g-cm)
0.002 oz. nominal (0.14 grams)
Approximately 50%