S2A_15 Datasheet, PDF (1/3 Pages) Diotec Semiconductor – Standard Recovery SMD Rectifier Diodes

Production specification
SURFACEMOUNTRECTIFIERS
S2A--S2M
FEATURES
z Low profile package
z For surface mounted applications
Pb
Lead-free
z High current capability
z Built-in strain relief, ideal for automated placement
z Plastic package has Underwriters Laboratory Flammability Classification 94V-0
z High temperature soldering: 250℃/10 seconds at terminals
MECHANICAL DATA
z Case: JEDEC DO-214AA,molded plastic over passivated chip
z Terminals: Solder Plated, solderable per MIL-STD- 750, Method 2026
z Polarity: Color band denotes cathode end
z Weight: 0.003 ounces, 0.093 gram
Maximum Ratings(@TA = 25°C unless otherwise specified)
Characteristic
Symbol S2A S2B S2D S2G S2J S2K S2M UNITS
Maximum repetitive peak reverse voltage
V_RRM
50
100
200
400
600
800 1000
V
Maximum RMS voltage
V_RWS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
V_DC
50
100
200
400
600
800 1000
V
Maximum average forward rectified current at T_L=100℃ IF(AV)
2.0
A
Peak forward surge current @ T_L = 110°C
8.3mssingle half-sine-wave
I_FSM
50.0
A
superimposed on rated load(JEDEC Method)
Thermal Characteristics
Characteristic
Symbol S2A S2B S2D S2G S2J S2K S2M UNITS
Typical junction capacitance (NOTE 1)
C_J
30.0
Typical thermal resistance (NOTE 2)
R _{θ JA}
R _{θ JL}
53.0
16.0
T_J
Operating junction and storage temperature range
T_STG
-55--------+150
Electrical Characteristics (@TA = 25°C unless otherwise specified)
pF
℃/W
℃
Characteristic
Symbol S2A S2B S2D S2G S2J S2K S2M UNITS
Maximum Instantaneous Forward Voltage at 2.0A
V_F
1.15
V
Maximum DC reverse current T_A=25℃
I_R
at rated DC blocking voltage T_A=125℃
5.0
μA
50
NOTE: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27''X0.27''(7.0X7.0mm2) copper pad areas
Document Number : SMB001AA
www.gmicroelec.com
1