RS3AB_12 Datasheet, PDF (1/3 Pages) Galaxy Semi-Conductor Holdings Limited – Surface Mount Rectifiers

Production specification
Surface Mount Rectifiers
RS3AB--RS3MB
FEATURES
 Low profile package
 For surface mounted applications
Pb
Lead-free
 Built-in strain relief, ideal for automated placement
 Plastic package has underwriters, laborator flammability classification 94V-0
 High temperature soldering: 250^oC/10 seconds at terminals
MECHANICAL DATA
 Case :JEDEC SMB, molded plastic over ,passivated chip
 Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
 Polarity: color band denotes cathode end
 Weight: 0.003 ounces, 0.093 gram
Maximum Ratings (@TA = 25°C unless otherwise specified)
Characteristic
Symbol RS3AB RS3BB RS3DB RS3GB RS3JB RS3KB RS3MB UNITS
Maximum recurrent peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
V
Maximum average forward rectified current TL=90℃
IF(AV)
3.0
A
Peak forward surge current
8.3ms single half-sine-wave
IFSM
100
A
superimposed on rated load
Thermal Characteristics
Characteristic
Symbol RS3AB RS3BB RS3DB RS3GB RS3JB RS3KB RS3MB UNITS
Typical junction capacitance (Note2)
Typical thermal resistance (Note3)
Operating junction and storage temperature range
CJ
RΘJA
TJ TSTG
32
40.0
- 55 ------ + 150
pF
℃/W
℃
Electrical Characteristics (@TA = 25°C unless otherwise specified)
Characteristic
Symbol RS3AB RS3BB RS3DB RS3GB RS3JB RS3KB RS3MB UNITS
Maximum instantaneous forward voltage at3.0 A
VF
Maximum reverse current
at rated DC blocking voltage
@TA=25 ℃
IR
@TA=125℃
Typical reverse recovery time (Note1)
trr
1.30
V
5.0
μA
200
150
250
500
ns
NOTE: 1.Reverse recovery time test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
3. Thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.2''X0.2''(5.0X5.0mm2) copper pad areas
Document Number : SMB203AA
www.gmicroelec.com
1