1N5333B Datasheet, PDF (1/5 Pages) Motorola, Inc – 5 WATT ZENER REGULATOR DIODES 3.3-200 VOLTS

BL ^{GALAXY ELECTRICAL}
ZENER DIODES
1N5333B - - - 1N5388B
POWER DISSIPATION: 5.0 W
FEATURES
Silicon planar power zener diodes
For use in stabilizing and clipping curcuits with high
power rating.
Standard zener voltage tolerance is ±10%. Add
suffix "B" for ±5% tolerance. other zener voltage
and tolerances are available upon request.
MECHANICAL DATA
Case:DO-27
Terminals: solderable per MIL-STD-202, method 208
Polarity: cathode Band
Marking: type number
Approx. weight: 1.15 grams.
DO - 27
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
SYMBOL
VALUE
UNIT
Zener current (see Table "Characteristics")
DC pow er dissipation @ T_L=75 , measure at zero lead length (Fig.1)
derate above 75 (NOTE 1)
P_D
5.0
40.0
W
mW
Peak forw ard surge current 8.3ms single half sine-w ave superimposed on rated
load (JEDEC Method)(NOTE 1,2)
I_FSM
see fig.5
A
Junction temperature
TJ
-55---+150
Storage temperature range
Ts
NOTES: (1) Mounted on 8.0mm² copper pads to each terminal.
(2) 8.3ms single half sine-wav e, or equiv alent square wav e, duty cy cle=4 pulses per minute maximum.
-55---+150
www.galaxycn.com
Document Number 0284007
BLGALAXY ELECTRICAL
1.