|
BVA2140 Datasheet, PDF (1/37 Pages) BeRex Corporation – 0.7- 4GHz 1/4W Medium Power DIGITAL VARIABLE GAIN AMPLIFIER | |||
|
BVA2140
0.7- 4GHz 1/4W Medium Power DIGITAL VARIABLE GAIN AMPLIFIER
Product Description
Figure 2. Package Type
The BVA2140 is a digitally controlled variable gain amplifi-
er (DVGA) in a small 4x4mm QFN package, with a broad-
band frequency range of 700 to 4000 MHz and an oper-
ating VDD of 5.0V at 150mA.
BVA2140 is high performance and high dynamic range
makes it ideally suited for use in WCDMA/LTE wireless
infrastructure point-to-point and other demanding wire-
less applications.
The BVA2140 is an integration of a high performance digi-
tal 6-step attenuator (DSA) that provides a 31.5 dB attenu-
ation range in 0.5 dB steps, and high linearity broadband
gain block amplifiers featuring high ACLR and P1.
The BVA2140 digital control interface supports serial pro-
gramming of the attenuator, and includes the ability to
define the initial attenuation state at power-up.
Implementation requires only a few external components,
such as DC blocking capacitors on the Input and Output
pins, plus a bypass capacitor and a RF choke for the Output
port.
Figure 1. Functional Block Diagram
24-lead 4x4 mm QFN
Device Features
ï· Small 24-Pin 4 x 4 mm QFN Package
ï· Integrate Amp1 to DSA and DSA to Amp2 Functionality
ï· Wide Power supply range of +2.7~5.5V(DSA)
ï· Single Fixed +5.0V supply(Amp)
ï· 700-4000MHz Broadband Performance
ï· 30.2dB Gain at 2.14GHz (Matching Circuit)
ï· 2.9dB Noise Figure at max gain setting at 2.14GHz(Matching Circuit)
ï· 25.1dBm P1dB at 2.14GHz (Matching Circuit)
ï· 40dBm OIP3 at 2.14GHz(10dBm per tone, Matching Circuit)
ï· 15.2dBm LTE 20MHz ACLR at 1.9GHz (FDD E-TM1.1, 20MHz BW, ±20MHz
offset, PAR 9.81 at 0.01% Prob. , â50dBc)
ï· Attenuation: 0.5 dB steps to 31.5 dB
ï· Safe attenuation state transitions
ï· Monotonicity: 0.5 dB up to 4 GHz
ï· High attenuation accuracy(DSA to Amp)
±(0.3dB + 5% x Atten) @ 0.7~4GHz
ï· 1.8V control logic compatible
ï· Programming modes
- Serial
ï· Unique power-up state selection
18 17 16 15 14 13
VSS/GND 19
P/S 20
DSAIN 21
GND 22
AMP1OUT 23
GND 24
DSA
AMP1
AMP2
123456
12 CLOCK
11 DATA
10 DSAOUT
9 GND
8 AMP2IN
7 GND
Application
ï· Base station/Repeater Infrastructure
ï· LTE/WCDMA/CDMA Wireless infrastructure and other high performance RF
application
ï· Commercial/Industrial/Military Wireless system
ï· General purpose Wireless
BeRex
âwebsite: www.berex.com
âemail: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2016 BeRex
1
Rev. 0.1
|
▷ |