BT331_16 Datasheet, PDF (1/22 Pages) BeRex Corporation – 700-2700 MHz 1.5~2.0W Power Amplifier

BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Device Features
 OIP3 = 51.0 dBm @ 1900 MHz
 Gain = 19.5 dB @ 900 MHz
 Output P1 dB = 33.3 dBm @ 1900 MHz
 50 Ω Cascadable
 Highly Reliable InGaP/GaAs HBT Technology
 Lead-free/RoHS-compliant SOIC-8 SMT package
YY = Year, WW = Work week,
XX = Wafer Number
Product Description
Typical Performance¹
BeRex’s BT331 is a high power and a high
dynamic range amplifier in a low cost sur-
face mount package(SOIC-8) with a RoHS-
compliant, that incorporates reliable hetero- ^Gain
junction-bipolar-transistor (HBT) devices
S11
Frequency
Unit
900 1900 2140 2450 2600 3500 MHz
19.5 14 13 12 12.1 ^10.7 dB
-16 -14 -15 -20 -19 ^-20.4 dB
fabricated with InGaP GaAs technology.
S22
-11 -11 -12 -10 -12.7 ^-13.0 dB
This device is designed for use where high
OIP3²
50 51 51 50 47 ^45.8 dBm
linearity is required and features high OIP3 _P1dB
31.5 33.3 32.3 31 31.2 ^29.5 dBm
and Power with low consumption current
IS-95C ACPR 23.3
-
-
-
-
- dBm
(400mA) and requires a few external match-
ing components such as a DC blocking ca-
pacitors on the In/Output pin, a bypass ca-
pacitor and a RF choke for the out port.
WCDMA ACLR - 23.3 23.4 21.5 21.5 20.1
Noise Figure 4.8
5
5 5.3 5.4 6.2
1 _{Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.}
2 _{OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz.}
dBm
dB
All devices are 100% RF/DC tested.
*ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc.
*ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob.
Applications
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Application Circuits
*ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob.
Bandwidth
I_C @ (Vc = 5V)
V_C
R_TH
Min.
Typical
Max.
Unit
700
2700
MHz
360
415
455
mA
5.0
V
10.0
°C/W
RF Choke
Vcc
Bypass
Absolute Maximum Ratings
Parameter
Rating
Unit
RF In
DC
Block
BT331
DC
Block
RF Out
Operating Case Temperature
-40 to +85
°C
Storage Temperature
-55 to +155
°C
Junction Temperature
+220
°C
*external matching circuit: refer to the page 4 to 16.
Operating Voltage
+5.5
V
Supply Current
900
mA
Input RF Power
28
dBm
*Operation of this device above any of these parameters may result in permanent damage.
BeRex
●website: www.berex.com
● email: [e-mail]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2015 BeRex
1
Rev. G