BT301_16 Datasheet, PDF (1/18 Pages) BeRex Corporation – 500-4000 MHz High Power Amplifier

BT301
500-4000 MHz High Power Amplifier
Device Features
 OIP3 = 49.0 dBm @ 1900 MHz
 Gain = 12.5 dB @ 1900 MHz
 Output P1 dB = 30.3 dBm @ 1900 MHz
 50 Ω Cascadable
 Patented Over Voltage Protection Circuit
 Lead-free/RoHS-compliant SOIC-8 package
YY = Year, WW = Work week,
XX = Wafer Number
Product Description
Typical Performance¹
BeRex’s BT301 is a high power and a high
Parameter
Frequency
Unit
dynamic range amplifier in a low cost sur-
900 1900 2140 2450 3500 MHz
face mount package(SOIC-8) with a RoHS-
Gain
compliant, that incorporates reliable hetero-
junction-bipolar-transistor (HBT) devices
S11
fabricated with InGaP GaAs technology.
S22
18.5 12.5 11.5 10.5 7.6
dB
-15 -18 -18 -12 -23.2
dB
-7 -12 -12 -11 -17.4
dB
This device is designed for use where high OIP3²
49 49 47 49 42.5 dBm
linearity is required and features high OIP3 P1dB
29.5 30.3 30.3 30.3 27.9 dBm
and Power with low consumption current
IS-95C ACPR 22.5 22.5 -
-
-
dBm
(350mA) and requires a few external match- _{WCDMA ACLR -}
-
21 21 18.4 dBm
ing components such as a DC blocking ca-
pacitors on the In/Output pin, a bypass ca-
pacitor and a RF choke for the out port.
All devices are 100% RF/DC tested.
Noise Figure 8.5 8.6 7.5 7.5 7.3
dB
1 _{Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.}
2 _{OIP3 _ measured with two tones at an output of 16 dBm per tone separated by 1 MHz.}
*ACPR&ACLR CH Power _ measured at 50dBc.
*ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset.
Applications
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Application Circuits
*ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset.
Bandwidth
I_C @ (Vc = 5V)
V_C
R_TH
Min.
Typical
Max.
500
4000
310
350
390
5.0
19.6
Unit
MHz
mA
V
°C/W
RF Choke
Vcc
Bypass
Absolute Maximum Ratings
Parameter
Rating
Unit
RF In
DC
Block
BT301
DC
Block
RF Out
Operating Case Temperature
-40 to +85
°C
Storage Temperature
-55 to +155
°C
Junction Temperature
+220
°C
*external matching circuit: refer to the page 4 to 11.
Operating Voltage
+6.0
V
Supply Current
600
mA
Input RF Power
28
dBm
*Operation of this device above any of these parameters may result in permanent damage.
BeRex
●website: www.berex.com
● email: [e-mail]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2015 BeRex
1
Rev. F