BT301_1 Datasheet, PDF (1/17 Pages) BeRex Corporation – 500‐4000 MHz High Power Amplifier

BT301
500‐4000 MHz High Power Amplifier
Device Features
 OIP3 = 49.0 dBm @ 1900 MHz
 Gain = 12.5 dB @ 1900 MHz
 Output P1 dB = 30.3 dBm @ 1900 MHz
 50 Ω Cascadable
 Patented Over Voltage Protec on Circuit
 Lead‐free/RoHS‐compliant SOIC 8 SMT package
YY = Year, WW = Work week,
XX = Wafer Number
Product Descrip on
Typical Performance¹
BeRex’s BT301 is a high power and a high
Parameter
dynamic range amplifier in a low cost sur‐
face mount package(SOIC‐8) with a RoHS‐
900
compliant, that incorporates reliable hetero‐ ^Gain
18.5
junc on‐bipolar‐transistor (HBT) devices
S11
‐15.0
fabricated with InGaP GaAs technology.
S22
‐7.0
This device is designed for use where high
OIP3²
49.0
Frequency
1900
12.5
‐18.0
‐12.0
49.0
2140
11.5
‐18.0
‐12.0
47.0
Unit
2450 MHz
10.5
dB
‐12.0
dB
‐11.0
dB
49.0 dBm
linearity is required and features high OIP3 P1dB
29.5
30.3
30.3
30.3 dBm
and Power with low consump on current
IS‐95C ACPR
22.5
22.5
‐
‐
dBm
(350mA) and requires a few external match‐ WCDMA ACLR ^‐
‐
21.0
21.0 dBm
ing components such as a DC blocking ca‐
pacitors on the In/Output pin, a bypass ca‐
pacitor and a RF choke for the out port.
All devices are 100% RF/DC tested.
Noise Figure 8.5
8.6
7.5
7.5
dB
1 _{Device performance _ measured on a BeRex evalua on board at 25°C, 50 Ω system.}
2 _{OIP3 _ measured with two tones at an output of 16 dBm per tone separated by 1 MHz.}
*ACPR&ACLR CH Power _ measured at 50dBc.
*ACPR Test set‐up: IS‐95 CDMA, 9Ch. FWD, +885KHz offset.
Applica ons
 Base sta on Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Applica on Circuits
*ACLR Test set‐up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset.
Bandwidth
I_C @ (Vc = 5V)
V_C
R_TH
Min. Typical Max.
500
4000
310
350
390
5.0
19.6
Unit
MHz
mA
V
°C/W
Absolute Maximum Ra ngs
*external matching circuit: refer to the page 4 to 11.
Parameter
Ra ng
Unit
Opera ng Case Temperature
‐40 to +85
°C
Storage Temperature
‐55 to +155
°C
Junc on Temperature
+220
°C
Opera ng Voltage
+6.0
V
Supply Current
600
mA
Input RF Power
28
dBm
*Opera on of this device above any of these parameters may result in permanent damage.
BeRex
●website: www.berex.com
● email: [e-mail]
Specifica ons and informa on are subject to change and products may be discon nued without no ce. BeRex is a trademark of BeRex.
All other trademarks are the property of their respec ve owners. © 2010 BeRex
1
Rev. C