BG14B_15 Datasheet, PDF (1/10 Pages) BeRex Corporation – 5-6000 MHz Cascadable InGaP HBT Gain Block

BG14B
5-6000 MHz Cascadable InGaP HBT Gain Block
Device Features
 OIP3 = 35 dBm @ 1900 MHz
 Gain = 16 dB @ 1900 MHz
 Output P1 dB = 19.5 dBm @ 1900 MHz
 50 Ω Cascadable
 Patented temperature compensation
 Lead-free/RoHS-compliant SOT-89 SMT package
Product Description
BeRex’s BG14B is a high performance InGaP/
GaAs HBT MMIC amplifier, internally
matched to 50 Ohms and uses a patented
temperature compensation circuit to pro-
vide stable current over the operating tem-
perature range without the need for exter-
nal components. The BG14B is designed for
high linearity gain block applications that
require excellent gain flatness. It is packaged
in a RoHS-compliant with SOT-89 surface
mount package.
Typical Performance¹
Parameter
Frequency
Unit
70 500 900 1900 2450 5800 MHz
Gain
17.3 17.3 17.0 16.0 15.2 11.9 dB
S11
-20.0 -18.5 -17.5 -27.5 -19.0 -9.3 dB
S22
OIP3²
-13.0
37.0
-14.0
37.5
-15.0
36.5
-10.5 -10.0 -12.6 dB
35.0 33.5 25.5 dBm
P1dB
19.5 19.5 19.5 19.5 19.5 15.5 dBm
NF
5.0
5.0
5.0
5.2 5.5 9.5 dB
1 _{Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.}
2 _{OIP3 _ measured with two tones at an output of 9 dBm per tone separated by 1 MHz.}
Applications
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Applications Circuit
Bandwidth
I_C @ (Vc = 5V)
V_C
dG/dT
R_TH
Min.
Typical Max.
Unit
5
6000
MHz
70
75
85
mA
5.0
V
-0.004
dB/°C
85
°C/W
Absolute Maximum Ratings
Parameter
Rating
Unit
Operating Case Temperature
-40 to +85
°C
Storage Temperature
-55 to +155
°C
Junction Temperature
+220
°C
*C1, C2, C3 =100 pF ± 5%; C4 = 1000 pF ± 5%; C5 = 10uF; L1 = 39nH
*less than 20nH improves RF performance at over 1.9GHz.
*40nH or higher value L1 improves RF performance at under 500MHz.
*Optimum value of L1 may vary with board design.
Operating Voltage
+6.5
V
Supply Current
150
mA
Input RF Power
23
dBm
Operation of this device above any of these parameters may result in permanent damage.
*C1,C2=8200pF, L1=1200nH for 70MHz application,
Vcc=5.2V if 1200nH is used to compensate IR drop across L1.
BeRex
●website: www.berex.com
●email: [e-mail]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
1
Rev. F