BD2626 Datasheet, PDF (1/4 Pages) BeRex Corporation – Dual Band 2-Way SMT Power Divider

BD2626
Dual Band 2-Way SMT Power Divider
2400~2900MHz WCDMA, WiBro & LTE
Device Features
 Typical Isolation = 25.0 dB
 Typical Insertion Loss = 0.6 dB
 MSL 1 moisture rating
 Small Size and Low Profile
 Lead-free/RoHS-compliant SOT-26 Plastic Package
BD26XX(XX=Wafer number)
Product Description
BeRex’s Divider BD2626 is designed for
WCDMA WiBro & LTE band with low Inser-
tion Loss and Isolation. This chip is fully pas-
sivated for enhanced performance and relia-
bility and packaged in RoHS-compliant with
SOT-26 surface mount package.
Typical Performance¹
Parameter
Min Typical Max Unit
Frequency Range
2400
2900 MHz
Insertion Loss
0.6
0.8
dB
Isolation
21.5 28.0
dB
IRL(S11)
-26.0 -29.0 dBm
ORL(S22/S33)
-23.0 -26.0 dBm
Amplitude Balance
Phase Balance
0.1
0.15
dB
0.75
1.5
deg
*All specifications apply to the following test conditions,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Insertion Loss: Above 3.0dB.
Applications
 Base station Infrastructure
 Commercial/Industrial/Military wireless system
Absolute Maximum Ratings
Parameter
Input Power
Storage Temperature
Operating Temperature
Rating
1.5W CW dBm
-55 to +155°C
-40 to +85°C
Operation of this device above any of these parameters may result in permanent damage.
Evaluation Board Drawing
Function Block Diagram
Pins 2,4 and 6 must be DC and RF grounded.
BeRex
●website: www.berex.com
●email: [e-mail]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2013 BeRex
1
Rev. B