|
BD1926_14 Datasheet, PDF (1/4 Pages) BeRex Corporation – Dual Band 2-Way SMT Power Divider | |||
|
BD1926
Dual Band 2-Way SMT Power Divider
1700~2300MHz PCS, WCDMA & TD-SCDMA
Device Features
ï· Typical Isolation = 24.5 dB
ï· Typical Insertion Loss = 0.6 dB
ï· MSL 3 moisture rating
ï· Small Size and Low Profile
ï· Lead-free/RoHS-compliant SOT-26 Plastic Package
BD19XX(XX=Wafer number)
Product Description
BeRexâs Divider BD1926 is designed for PCS,
WCDMA & TD-SCDMA band with low Inser-
tion Loss and Isolation. This chip is fully pas-
sivated for enhanced performance and relia-
bility and packaged in RoHS-compliant with
SOT-26 surface mount package.
Typical Performance1
Parameter
Min Typical Max Unit
Frequency Range
1700
2300 MHz
Insertion Loss
0.6
0.8
dB
Isolation
16.5 24.5
dB
IRL(S11)
-16.0 -11.5 dBm
ORL(S22/S33)
-24.0 -19.5 dBm
Amplitude Balance
Phase Balance
0.07
0.2
dB
1.5
2.0
deg
*All specifications apply to the following test conditions,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Insertion Loss: Above 3.0dB.
Applications
ï· Base station Infrastructure
ï· Commercial/Industrial/Military wireless system
Absolute Maximum Ratings
Parameter
Input Power
Storage Temperature
Operating Temperature
Rating
1W CW dBm
-55 to +155°C
-40 to +85°C
Operation of this device above any of these parameters may result in permanent damage.
Evaluation Board Drawing
Function Block Diagram
Pins 2,4 and 6 must be DC and RF grounded.
BeRex
âwebsite: www.berex.com
âemail: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
1
Rev. D
|
▷ |