BD1926_1 Datasheet, PDF (1/4 Pages) BeRex Corporation – Dual Band 2‐Way SMT Power Divider

BD1926
Dual Band 2‐Way SMT Power Divider
1700~2300MHz PCS, WCDMA & TD‐SCDMA
Device Features
 Typical Isola on = 24.5 dB
 Typical Inser on Loss = 0.6 dB
 MSL 1 moisture ra ng
 Small Size and Low Profile
 Lead‐free/RoHS‐compliant SOT‐26 Plas c Package
BD19XX(XX=Wafer number)
Product Descrip on
BeRex’s Divider BD1926 is designed for PCS,
WCDMA & TD‐SCDMA band with low Inser‐
on Loss and Isola on. This chip is fully pas‐
sivated for enhanced performance and relia‐
bility and packaged in RoHS‐compliant with
SOT‐26 surface mount package.
Typical Performance¹
Parameter
Min Typical Max Unit
Frequency Range
1700
2300 MHz
Inser on Loss
0.6
0.8
dB
Isola on
16.5 24.5
dB
IRL(S11)
‐16.0 ‐11.5 dBm
ORL(S22/S33)
Amplitude Balance
Phase Balance
‐24.0 ‐19.5 dBm
0.07 0.2
dB
1.5
2.0
deg
*All specifica ons apply to the following test condi ons,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Inser on Loss: Above 3.0dB.
Applica ons
 Base sta on Infrastructure
 Commercial/Industrial/Military wireless system
Absolute Maximum Ra ngs
Parameter
Input Power
Storage Temperature
Opera ng Temperature
Ra ng
1W CW dBm
‐55 to +155°C
‐40 to +85°C
Opera on of this device above any of these parameters may result in permanent damage.
Evalua on Board Drawing
Func on Block Diagram
Pins 2,4 and 6 must be DC and RF grounded.
BeRex
●website: www.berex.com
●email: [e-mail]
Specifica ons and informa on are subject to change and products may be discon nued without no ce. BeRex is a trademark of BeRex.
All other trademarks are the property of their respec ve owners. © 2010 BeRex
1
Rev. C