BD0926_14 Datasheet, PDF (1/4 Pages) BeRex Corporation – Dedicated Band 2-Way SMT Power Divider

BD0926
Dedicated Band 2-Way SMT Power Divider
700~1000MHz Cellular & GSM900
Device Features
 Typical Isolation = 23 dB
 Typical Insertion Loss = 0.6 dB
 MSL 3 moisture rating
 Small Size and Low Profile
 Lead-free/RoHS-compliant SOT-26 Plastic Package
BD09XX(XX=Wafer number)
Product Description
BeRex’s Divider BD0926 is designed for Cel-
lular & GSM band with low Insertion Loss
and Isolation. This chip is fully passivated for
enhanced performance and reliability and
packaged in RoHS-compliant with SOT-26
surface mount package.
Typical Performance¹
Parameter
Min Typical Max Unit
Frequency Range
700
1000 MHz
Insertion Loss
0.6
0.8
dB
Isolation
16.5 23.0
dB
IRL(S11)
-17.0 -14.5 dBm
ORL(S22/S33)
-20.0 -15.0 dBm
Amplitude Balance
Phase Balance
0.05
0.2
dB
0.4
0.5
deg
*All specifications apply to the following test conditions,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Insertion Loss: Above 3.0dB.
Applications
 Base station Infrastructure
 Commercial/Industrial/Military wireless system
Absolute Maximum Ratings
Parameter
Input Power
Storage Temperature
Operating Temperature
Rating
1W CW dBm
-55 to +155°C
-40 to +85°C
Operation of this device above any of these parameters may result in permanent damage.
Evaluation Board Drawing
Function Block Diagram
Pins 2,4 and 6 must be DC and RF grounded.
BeRex
●website: www.berex.com
●email: [e-mail]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
1
Rev. D