BL8092 Datasheet, PDF (1/7 Pages) SHANGHAI BELLING CO., LTD. – 18V (30V spike)2.5A Synchronous PFM/PWM Buck Converter

BL8092
18V (30V spike)2.5A Synchronous PFM/PWM Buck Converter
DESCRIPTION
The BL8092 is a high efficiency current-mode
synchronous, 18V/2.5A buck converter. Its input
voltage ranges from 3.5V to 18V and it provides
an adjustable regulated output voltage from
0.923V to 15V while delivering up to 2A of output
current.
The internal synchronous switches increase
efficiency and eliminate the need for an external
Schottky diode. The switching frequency is set to
340KHz. And the BL8092 will automatically switch
between PFM and PWM mode based on the load
current, thus to enhance the converter efficiency
at light load.
BL8092 consists of many protection block such as
UVLO, input voltage over voltage protection to
stand much higher input voltage spike, thermal
protection and output short circuit protection.
The BL8092 is available in the SOP8 and ESOP8
(with exposed pad for heat dissipation) package.
FEATURES
 Adjustable Output Voltage, Vfb=0.923V
 Maximum output current is 2.5A
 Range of operation input voltage: Max 18V
 UVLO: 3.4V (typ.)
 Withstand input voltage spike >30V
 Standby current: 1mA (typ.)
 Operating current at zero load: 1.2mA (typ.)
 Line regulation: 0.1%/V (typ.)
 Load regulation: 10mV (typ.)
 High efficiency, up to 95%
 Environment Temperature: -20C~85C
APPLICATIONS
 Set-top-box
 Consumer Electronic Device for automobile
 LCD Monitor and LCD TV
 Portable DVD
 ADSL Modem, WLAN router
 Other 12V or double cell Li-ion battery
powered device
TYPICAL APPLICATION
10uH
VIN
10uF
BST
SS
10nF
VIN
EN
B^LL^CC8²²0³³9²²²¹
SW
COMP
GND
FB
0.1uF
100K
3.3nF 5.6K
*Cc optional
26.1K
10K
VOUT
3.3V/2A
22uF
x2
* When Vin is as low as 5V, Cc is recommended to
be 100pf, but not needed when Vin larger than 5V.
PIN OUT
BST
SS
VIN
EN
B^LLL^CC8²²³0²³¹9²²2
SW
COMP
GND
FB
SOP8 and ESOP8
PFM at Light Load
Zero Load Operating Current vs. Vin
7
6
5
4
3
2
1
0
0
5
10
15
20
Vin(V)
www.belling.com.cn
1