|
BL6562 Datasheet, PDF (1/6 Pages) SHANGHAI BELLING CO., LTD. – Transition-mode control | |||
|
BL6562
SHANGHAI BELLING CO.,LTD.
ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424
BL6562 ACTIVE PFC CONTROLER
1 Features
ïµ Transition-mode control
ïµ Low start-up current (<70uA)
ïµ Ultra-low quiescent currentâ¤2mA
ïµ Ultra-low operating currentâ¤2.2mA
ïµ Large IC supply voltage operating range
ïµ Supply currentâ¤1mA after disable
ïµ 1%(@Tj=25âC) internal reference voltage
ïµ System operation protection:
Dynamic and static over voltage protection
Under-voltage lockout function
Figure1 PACKAGES
Peak current limited
Supply voltage upper clamped
Output voltage upper clamped
ïµ -400mA/+600mA totem pole output driver with UVLO pull-down
Applications
ïµ LED Light Driver
ïµ Electronic Ballast
ïµ AC/DC Adapter
2 General descriptions
BL6562 is an active power factor correct controller operating in transition mode, which is
mainly used in small power electronic ballast, LED light driver and AC/DC adapter.
Realised in advanced BCD technology, BL6562 features ultra-low start-up current and
operating current (⤠2.2mA @12V). Remote IC DISALBE function can make it work at power
saving mode.
BL6562 includes an internal highly linear multiplier, able to provide a high power factor in
wide-range-mains operation and over a large range load change. The max current of the
MOSFET is limited to the upper clamp output voltage of the multiplier.
Dynamic and static over-voltage protection, internal supply voltage upper clampãunder
voltage lockout and output upper clamp functions can make the system work safely.
-400mA/+600mA totem pole output driver is capable of driving large power
MOSFET and IGBT.
Figure 2 Pin connection
1 INV
2 COMP
3 MULT
4 CS
Vcc 8
GD 7
GND 6
ZCD 5
8 LEAD SOP or DIP
-1-
|
▷ |