BL1530TQFN Datasheet, PDF (1/12 Pages) SHANGHAI BELLING CO., LTD. – Low-Power, Two-Port, High-Speed

BL1530—DPDT USB2.0 Analog Switch
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps)
DPDT Analog Switch BL1530
Description
The BL1530 is a Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) double –pole double-throw
(DPDT) Analog Switch featuring an On-Resistance of 4.5 ohm at VCC=3V and a Low On Capacitance
3.7pf Typical.
The BL1530 is compatible with the requirements of USB2.0 and the wide bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to
channel crosstalk also minimizes interference. Break-before-make function for both parts eliminates
signal disruption during switching from preventing both switches being enabled simultaneously.
The BL1530 contains special circuitry on the switch I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to withstand an over-voltage condition. This device is
designed to minimize current consumption even when the control voltage applied to the Sel pin is lower
than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications, such as
cell phones, allowing for direct interface with the general purpose I/Os of the baseband processor. Other
applications include switching and connector sharing in portable cell phones, PDAs, digital cameras,
printers, and notebook computers.
Pin Configuration
OEb ₈
Dn1
Dn2
7
6
5 ^Dn
VCC 9
BL1530
4 ^GND
Sel ₁₀
1
2
Dp1
Dp2
UTQFN1.8×1.4-10L
3 ^Dp
MSOP10L
http://www.belling.com.cn
-1-
Total 12 Pages