XRP4-80E1A0 Datasheet, PDF (4/13 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.8375 Vdc – 5.0 Vdc/80 A Output
Jun. 02, 2011
Bel Power Inc., a subsidiary of Bel Fuse Inc.
General Specifications (continued)
Parameter
Min
Over Voltage Protection
110% Vo,set
Typ
Max
Notes
115%Vo,set 130%Vo,set Vin=12 V, Io=full load.
Over Temperature Protection
-
105 C
-
MTBF
Dimensions
Dimensions
Weight
Inches (L × W × H)
Millimeters (L × W × H)
Inches (L × W × H)
Millimeters (L × W × H)
2,198,818 hours
2.58 x 1.25 x 0.648
65.53 x31.75 x 16.46
2.58 x 1.25 x 0.61
65.53 x31.75 x 15.44
-
42 g
-
0RP4-80E1A0
VRP4-80E1A0
Note: All specifications are typical at 25 C unless otherwise stated.
Control Specifications
Parameter
Min
Typ
Max
Notes
Remote On/Off (Active High)
Signal Low (Unit Off)
Signal High (Unit On)
-0.3 V
-
0.8 V
2V
-
Vin,max
Remote On/Off pin is open, unit is on.
Current Source/Sink
0 mA
-
3.3 mA
PwGood (PowerGood)
PwGood = High = Power
2.4 V
-
Good
-
-
5.25 V
2 mA
PwGood = Low = Power
0V
-
0.4 V
Not Good
-
-
4 mA
Output Trim Equation
The Trim resistor should be connected between the Trim+ pin and Trim- pin.
Vout
trim
Trim+
Rtrim
Trim–
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302  Tel [phone]  Fax [phone]  www.belfuse.com