XRAH-03C1A0 Datasheet, PDF (2/9 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
3.3 Vdc Input
0.9 Vdc - 2.5 Vdc/3 A Output
Input Specifications (continued)
Parameter
Min
Typ
Max
Notes
Input Reflected Ripple Current (pk-pk)
-
Input Reflected Ripple Current (rms)
-
50 mA
15 mA
100 mA
25 mA
With simulated source impedance
of 500 nH, 5 Hz to 20 MHz; use a
270 uF/6.3 V capacitor with
ESR=0.03 ohm max, at 100 kHz.
I²t Inrush Current Transient
Turn on Voltage Threshold
Turn off Voltage Threshold
-
0.01 A²s
0.02 A²s
-
2.7 V
-
-
2.4 V
-
Note: All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Output Voltage Set Point
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
Line Regulation
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
Load Regulation
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
Regulation Over Temperature
(-40 °C to +85 °C)
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
Output Current
Current Limit Threshold
Short Circuit Surge Transient
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
Min
2.450 V
1.764 V
1.470 V
1.176 V
0.882 V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0A
5A
-
-
-
-
-
Typ
2.5 V
1.8 V
1.5 V
1.2 V
0.9 V
1 mV
1 mV
1 mV
1 mV
1 mV
1 mV
1 mV
1 mV
1 mV
1 mV
Max
2.550 V
1.836 V
1.530 V
1.224 V
0.918 V
Notes
Test conditions:
Vin=3.3 V, Io= full load
5 mV
5 mV
5 mV
5 mV
5 mV
5 mV
5 mV
5 mV
5 mV
5 mV
10 mV
10 mV
10 mV
10 mV
10 mV
-
-
0.04 A²s
0.04 A²s
0.04 A²s
0.04 A²s
0.04 A²s
20 mV
20 mV
20 mV
20 mV
20 mV
3A
9A
0.08 A²s
0.08 A²s
0.08 A²s
0.08 A²s
0.08 A²s
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com