G2PW2V560 Datasheet, PDF (2/8 Pages) Bel Fuse Inc. – PISCES II DC/DC CONVERTERS

POWER PRODUCTS
G2PW2V560
PISCES II DC/DC CONVERTERS
48V Input – 2.5VDC – 60A Output
Input Specifications
Parameter
Min
Typical
Max
Units
Operating Input Voltage
Input Current
36
48
75
V_DC
6
A
Input Capacitance
4
µF
Input Hysteresis, Low Line
2
V_DC
VIN = 48V_DC, T_A@25˚ C, 300 LFM Airflow, V_OUT = 2.5V_DC, I_OUT = Full load unless otherwise noted.
Available output power depends on ambient temperature and good thermal management.
(See application graphs for limits.)
Output Specifications
Parameter
Min
Typical
Max
Units
Regulation Over Line, Load & Temperature
Voltage Ripple
Voltage Ripple, 20MHz BW
Current Range
98
102
%V_NOM
25
mV _RMS
85
mV _P–P
0
60
A
Current Limit Inception
Short Circuit Current, Peak¹
103
140
%I_OUT
90
A
Output Transient Response, 50% to 75% Load Change, 1A/µsec
Settling Time to ± 1%
5
%V_OUT
200
µS
Turn-on Time to 98% Vnom
35
mS
Output Overshoot at Turn-on
Trim Range
Over Voltage Protection, Latching
0
%V_OUT
70
110
%V_OUT
130
%V_OUT
1. During short circuit, converter will shut down and attempt to restart once per second. The average current during this
condition will be very low and the device can be safely left in this condition continuously.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 11.06
Bel Power Inc. 155 Flanders Road, Westborough, MA 01581 • Tel [phone] • Fax [phone] • www.belpower.com
page 2