SLIN-06F2A Datasheet, PDF (13/26 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /6 A Outputs
January 13, 2011
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Output Filtering (continued)
25
20
20
15
15
1x10uF External Cap
1x47uF External Cap
1x10uF External Cap
10
2x47uF External Cap
4x47uF External Cap
10
1x47uF External Cap
2x47uF External Cap
4x47uF External Cap
5
5
0
0.5
1
1.5
2
2.5
3
3.5
Output Voltage(Volts)
Figure A Output ripple voltage for various output
voltage at Vin=5V, 6A load
0
0.5
1
1.5
2
2.5
3
Output Voltage(Volts)
Figure B Output ripple voltage for various output voltage
at Vin=3.3V, 6A load
Safety Considerations
For safety agency approval the power module must be installed in compliance with the spacing and separation
requirements of the end-use safety agency standards, i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power module has extra-low voltage (ELV) outputs when all inputs
are ELV.
The input to these units is to be provided with a fast-acting fuse with a maximum rating of 6A in the positive
input lead.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
13