English
Language : 

XRSB-50R08X Datasheet, PDF (1/7 Pages) Bel Fuse Inc. – ISOLATED DC/DC CONVERTERS
ISOLATED DC/DC CONVERTERS
24 Vdc Input 8 Vdc / 5 A Output 1/16 Brick
xRSB-50R08x RoHS Compliant
Rev.A
• Isolated
• Fixed Frequency (600 kHz)
• High Efficiency
• High Power Density
• Low Cost
• Output Voltage Trim
• Basic Insulation
• Input Under Voltage Lockout
• Output Over Voltage Shutdown
• OCP/SCP
• Over Temperature Protection
• Remote On/Off (option)
• Positive/Negative Remote Sense
• Through Hole and SMT (option)
Description
The xRSB-50R08x series are isolated dc/dc converters that operate from a nominal 24 Vdc source. These units
will provide up to 40 W of output power from a nominal 24 Vdc input. These units are designed to be highly
efficient and low cost. Features include remote on/off, over current protection and under voltage lockout. These
converters are provided in an industry standard sixteenth brick package.
Part Selection
Output
Voltage
Input
Voltage
8V
18 V - 36 V
Max. Output
Current
5A
Max. Output
Power
40 W
Typical
Efficiency
90%
Model Number
Active Low
xRSB-50R08L
Model Number
Active High
xRSB-50R080
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging. Replace”x” with “S” to
indicate SMT package, or “0” to indicate through hole package.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Input Voltage (continuous)
-0.3 V
-
40 V
Remote On/Off
-0.3 V
-
18 V
I/O Isolation Voltage
-
-
1500 V
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-55 °C
-
125 °C
Notes
Input Specifications
Parameter
Input Voltage
Input Current (full load)
Input Current (no load)
Remote Off Input Current
Input Reflected Ripple Current (pk-pk)
Input Reflected Ripple Current (rms)
I2t Inrush Current Transient
Min
18 V
-
-
-
-
-
-
Typ
24 V
-
80 mA
1 mA
20 mA
3 mA
0.01 A2s
Max
36 V
3.5 A
160 mA
3 mA
50 mA
7 mA
0.02 A2s
Notes
Tested with simulated source impedance of
15 uH, 5 Hz to 20 MHz; use a 100 uF/100 V
electrolytic capacitor with ESR=1 ohm max at
200 kHz at the input.
Turn On Voltage Threshold
Turn Off Voltage Threshold
-
17 V
-
-
16 V
-
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com