|
VRP3-90EXA0 Datasheet, PDF (1/14 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS | |||
|
NON-ISOLATED DC/DC CONVERTERS
6.5 Vdc - 13.2 Vdc Input, 1.2 Vdc - 2.1 Vdc Output
Aug. 12, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
VRP3-90ExA0
RoHS Compliant Rev.G
Features
⢠Non-Isolated
⢠Over/Under Voltage Protection
⢠High Efficiency
⢠OCP/SCP
⢠Fixed Frequency
⢠2-Wire Remote sense
⢠Wide Input
⢠2 bit VID Digital Voltage Programming
⢠Remote On/Off
⢠Open-drain Power Good Output
⢠IMON Pin for Output Current Monitoring
⢠Power State Indicator(PSI#) Pin for Phase Dropping and Higher
Efficiency During Light Load States
⢠Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Applications
⢠Networking
⢠Computers and peripherals
⢠Telecommunications
Description
The VRP3-90ExA0 series are non-isolated step down DC/DC converters providing up to 90 A output current.
Standard features include remote on/off, remote sense, 2 bit VID digital voltage programming, a power good
signal, over voltage and under voltage protection, over current protection, current monitor and power State
Indicator (PSI#). This product may be used almost anywhere low-voltage silicon is being employed and a
nominal 12V source is available. Typical applications include telecommunications, networking and other
computing applications.
Part Selection
Output Voltage
Input Voltage
1.21 Vdc - 2.1Vdc 6.5 Vdc - 13.2 Vdc
Max. Output
Current
90 A
Max. Output
Power
200 W
Typical
Efficiency
85%
1.2 Vdc - 2.1Vdc 6.5 Vdc - 13.2 Vdc
90 A
200 W
85%
Notes: Add âGâ suffix at the end of the model number to indicate Tray Packaging.
Model Number
Active High
VRP3-90E1A0
VRP3-90E2A0
Part Number Explanation
V R P3 â 90 E 1A 0
12 3 4 5 6 7
1---Vertical mount
2---RoHS 6, change âRâ to â7â means RoHS 5
3---Series name, SIP
4---Series code, output current 90A
5---Wide input range (6.5-13.2V)
6---â1Aâ, â2Aâ Wide trim range
7---Suffix
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 ⢠Tel 201-432-0463 ⢠Fax 201-432-9542 ⢠www.belfuse.com
1
|
▷ |