VRP1-30E3A Datasheet, PDF (1/14 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
6.5 Vdc - 13.8 Vdc Input, 1.025 Vdc - 1.2 Vdc/30 A Output
Mar. 07, 2011
Bel Power Inc., a subsidiary of Bel Fuse Inc.
VRP1-30E3Ax RoHS Compliant Rev.A
Features
 Non-Isolated
 Under Voltage Protection
 High Efficiency
 Output Over-Voltage Shutdown
 Fixed Frequency
 Wide Operating Temperature Range
 High Power Density
 OCP/SCP
 Wide Input
 Power Good Signal
 Remote Sense
 3 Bit VID Trim
 Remote On/Off
 Low Cost
 Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Applications
 Networking
 Computers and peripherals
 Telecommunications
Description
The Bel VRP1-30E3Ax is part of the non-isolated dc/dc converter Power Module series. The module uses a SIP
package. These converters are available output voltage trim via the 3 bit VID range from 1.025 Vdc to 1.2 Vdc
over a wide range of input voltage (Vin = 6.5 - 13.8 Vdc).The efficiency is typically 82% @ 12Vin and 1.2Vout at
full load.
Part Selection
Output Voltage Input Voltage
Max. Output Max. Output
Current
Power
Typical
Efficiency
Model Number
With Load Line
1.025 - 1.2 Vdc 6.5 - 13.8 Vdc
30 A
36 W
82%
VRP1-30E3A0
Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Model Number
Without Load Line
VRP1-30E3AD
Part Number Explanation
V R P1 – 30 E 3A x
12 3 4 56 7
1---Vertical mount
2---RoHS 6, change “R” to “7” means RoHS 5
3---Series name, SIP
4---Series code, 30A output
5--- Wide input range (6.5-13.8V)
6---Wide trim
7---Suffix
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302  Tel [phone]  Fax [phone]  www.belfuse.com
1