VRBC-10F2AX Datasheet, PDF (1/8 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 2.4 V - 5.5 V Input 0.75 V - 3.63 V/10 A Output

NON-ISOLATED DC/DC CONVERTERS
2.4 V - 5.5 V Input 0.75 V - 3.63 V/10 A Output
VRBC-10F2Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency (300kHz)
• OCP/SCP
• Flexible Output Voltage
Sequencing
• Over Temperature Protection
RoHS Compliant
• Under-Voltage Lockout (UVLO)
• Wide Input Range
• Wide Trim Range
• Remote On/Off
• Remote Sense
• Converter Can Sink and Source
Current
• Active Low/High (option)
Description
The Bel VRBC-10F2Ax modules are a series of non-isolated dc/dc converters that deliver up to 10 A of output
current with full load efficiency of 94% at 3.3 V output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 V to 3.63 V over a wide range of input voltage (2.4 V-5.5 V).
These modules have a sequencing feature that enables designers to implement various types of output voltage
sequencing when powering multiple voltages on a board. The open-frame construction and small footprint
enable designers to develop cost and space-efficient solutions. Standard features include remote On/Off,
remote sense, over current protection, short current protection, wide input, and programmable output voltage.
Part Selection
Output
Input
Voltage
Voltage
0.75 V - 3.63 V¹ 2.4 V - 5.5 V
Max. Output
Current
10 A
Max. Output
Power
36.3 W
Typical
Efficiency
94%
Model Number
Active Low
VRBC-10F2AL
Model Number
Active High
VRBC-10F2A0
Notes: 1. These modules use a buck topology, so the output voltages must be 0.5 V less than the input voltage.
2. Add “G” to the end of the Model Number to indicate Tray Packaging.
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Output Enable Terminal Voltage
-0.3 V
-
Sequencing Voltage ¹
-0.3 V
-
Ambient Temperature
-40 °C
-
Storage Temperature
-55 °C
-
Max
5.8 V
5.8 V
Vin
85 °C
125 °C
Notes
Notes: All specifications are typical at 25 °C unless otherwise stated.
1. VRBC-10F2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com