VRBC-10A1AX Datasheet, PDF (1/8 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/10 A Output
VRBC-10A1Ax RoHS Compliant
Rev.A
• Non-Isolated
• High Efficiency
• Fixed Frequency
• Low Cost
• Industrial Temperature Range
• Over Temperature Shutdown
• Wide Input
• Under Voltage Lockout (UVLO)
• OCP/SCP
• Remote Sense
• Wide Trim
• Remote On/Off
• Remote On/Off Logic
• Output Voltage Prebias
Description
The Bel VRBC-10A1Ax modules are series of the non-isolated dc/dc converters. The modules use a SIP package.
These converters are available in a range of output voltages from 0.75 Vdc to 5.0 Vdc over a wide range of input
voltage (Vin = 8.3 Vdc - 14 Vdc).The efficiency is typically 95%@5.0 Vout at full load.
Part Selection
Output Voltage Input Voltage
0.75 V - 5.0 V
8.3 V - 14 V
Max. Output
Current
10 A
Max. Output
Power
50.0 W
Typical
Efficiency
95%
Model Number
Active Low
VRBC-10A1AL
Model Number
Active High
VRBC-10A1A0
Notes: 1. Add “G” suffix at the end of the model number to indicate “Tray Packaging”.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Input Voltage (continuous)
-0.3 V
-
15 V
Output Enable Terminal Voltage
-0.3 V
-
15 V
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-55 °C
-
125 °C
Note: All specifications are typical at 25 °C unless otherwise stated.
Notes
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com