VRBA-06E1AX Datasheet, PDF (1/9 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input
0.75 Vdc - 5.0 Vdc/6 A Output
VRBA-06E1Ax
RoHS Compliant
Rev.A
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency
• Active Low/High (Option)
• Under-Voltage Lockout (UVLO)
• Remote On/Off
• OCP/SCP
• Wide Input
• Wide Trim Range
Description
The Bel VRBA-06E1Ax modules are a series of non-isolated dc/dc converters that can deliver up to 6 A of output
current with full load efficiency of 92% at 5.0 Vdc output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 Vdc to 5.0 Vdc over a wide range of input voltage. Their open-frame
construction and small footprint enable designers to develop cost and space-efficient solutions. Standard features
include remote On/Off, programmable output voltage and over current protection.
Part Selection
Output
Input
Voltage
Voltage
5.0 V
7.0 V -14 V
Max. Output
Current
6A
Max. Output
Power
30.0 W
Typical
Efficiency
92%
Model Number
Active Low
VRBA-06E1AL
Model Number
Active High
VRBA-06E1A0
0.75 V - 3.3 V 4.5 V - 14 V
6A
19.8 W
88%
VRBA-06E1AL
VRBA-06E1A0
Notes: 1. Add “G” suffix at the end of the model numbers to indicate Tray Packaging.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Output Enable Terminal Voltage
-0.3 V
-
Ambient Temperature
-40 °C
-
Storage Temperature
-55 °C
-
Max
15 V
15 V
85 °C
125 °C
Note: All specifications are typical at 25 °C unless otherwise stated.
Notes
Input Specifications
Parameter
Input Voltage
Vo, set ≤ 3.3 V
Vo, set = 5.0 V
Input Current (full load)
Vo=5.0 V
Vo=3.3 V
Vo=1.8 V
Vo=0.75 V
Input Current (no load)
Vo=5.0 V
Vo=0.75 V
Remote Off Input Current
Input Reflected Ripple Current (pk-pk)
Input Reflected Ripple Current (rms)
Min
4.5 V
7.0 V
-
-
-
-
-
-
-
-
-
Typ
12 V
12 V
2.75 A
1.85 A
1.05 A
0.55 A
-
-
3 mA
120 mA
60 mA
Max
14 V
14 V
4.8 A
4.8 A
3.2 A
1.8 A
100 mA
20 mA
5 mA
200 mA
100 mA
Notes
Tested with two 100 uF/25 V input
Tantalum capacitors & simulated source
impedance of 1uH, 5 Hz to 20 MHz.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com