V7PC-04C Datasheet, PDF (1/7 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V Output / 4A

NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A
V7PC-04C Series
• Nonisolated
• Industry standard pinout
• Fixed frequency
• High efficiency means less power dissipation
• Optimized for cost
• Remote on/off
• Undervoltage lockout
• Over current and short circuit protection
• Industrial temperature range
POWER PRODUCTS
BP02V7PC-04C
Description
The Bel V7PC-04C series modules are non-isolated, boost DC/DC power converters that operate from a nominal 3.3V
source. These converters provide an output voltage of 5V and are packaged in an industry standard single-in-line footprint
with 4A maximum output. Standard features include remote on/off, over current and short circuit protection. A version of this
converter is also available without remote on/off. These products may be used almost anywhere 5V is required and a 3.3V
source is available. Typical applications include file servers, routers, line cards and other computing and communications
equipment.
Applications
• Telecommunications
• Networking
• Computers and peripherals
Part Number Selection
Output
Voltage
Input
Voltage
Max. Output Max. Output Typical
Current
Power
Efficiency
Part Number
with Remote On/Off
5.0V
3.3V
4A
20W
90%
V7PC-04C500
Part Number
without Remote On/Off
V7PC-04C50N
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1